Robust Co-Design for Energy Saving of Plug-in Hybrid Electric Bus With Existing Components
Open Access
- 10 December 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 222013-222024
Abstract
The energy saving of Plug-in hybrid electric bus (PHEB) can be maximized by co-design method (integrated design of topology, component sizing and energy management). In many cases, the components have been manufactured, so it is a shortcut to realize the co-design with existing components. Motivated by this, a Taguchi robust design (TRD) method is proposed for the robust co-design of the PHEB. The main innovation is that the noises of driving cycles and stochastic vehicle mass are considered in the TRD, and the TRD is formulated as a smaller-the-better (STB) problem. Moreover, the signal-to-noise ratio (SNR) is taken as the analysis index, where the fuel economy together with its robustness can be simultaneously enhanced. In specific, the dynamic programming (DP) is firstly taking as the fuel consumption calculation module of the TRD. Then, a series of historical driving cycles and the stochastic vehicle mass are designed as noise factors; the components are designed as control factors. Finally, a receding horizon control (RHC) strategy is deployed to realize adaptive energy management control using the robust component match and the same DP. The TRD results demonstrate that the proposed co-design method is applicable and reasonable; the simulation results show that the RHC strategy can realize adaptive control, and averagely improve the fuel economy by 10.85.Keywords
Funding Information
- Project of Shandong Province Higher Educational Science and Technology Program (J16LB65)
This publication has 38 references indexed in Scilit:
- Review of recent trends in optimization techniques for plug-in hybrid, and electric vehicle charging infrastructuresRenewable and Sustainable Energy Reviews, 2016
- Multi-objective component sizing of plug-in hybrid electric vehicle for optimal energy managementClean Technologies and Environmental Policy, 2016
- Chaos oscillator differential search combined with Pontryagin’s minimum principle for simultaneous power management and component sizing of PHEVsOptimization and Engineering, 2016
- Multi-objective component sizing based on optimal energy management strategy of fuel cell electric vehiclesApplied Energy, 2015
- Optimizing the design of a plug-in hybrid electric vehicle from the early phase: an advanced sizing methodologyComputer-Aided Design and Applications, 2015
- Optimization of the component sizing for a plug-in hybrid electric vehicle using a genetic algorithmProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2015
- Performance Characteristic Analysis of Automated Robot Spray Painting Using Taguchi Method and Gray Relational AnalysisArabian Journal for Science and Engineering, 2015
- An applied methodology for multi-objective optimum sizing of hybrid electric vehicle componentsInternational Journal of Hydrogen Energy, 2015
- A Near-Optimal Power Management Strategy for Rapid Component Sizing of Multimode Power Split Hybrid VehiclesIEEE Transactions on Control Systems Technology, 2014
- Rule-Based Control Strategy With Novel Parameters Optimization Using NSGA-II for Power-Split PHEV Operation Cost MinimizationIEEE Transactions on Vehicular Technology, 2014