Multiresponse Optimization of Grinding AISI 316 Stainless Steel Using Grey Relational Analysis
Authors:
- 5 March 2013
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 28 (4) , 418-423
Abstract
The present study investigated the optimization of grinding AISI 316 stainless steel by the Taguchi and grey relational analysis under the three environments of dry, conventional, and cryogenic cooling. The performance characteristics considered are, the material removal rate (MRR), surface roughness (Ra), and grinding force (Ft). Experiments were conducted with Al2O3 (Aluminum Oxide) and Sol-Gel (SG) grinding wheels under different cutting conditions, such as work speed, depth of cut, and cooling environments. An orthogonal array L18 is used for the experimental design. The optimum levels of the machining parameters were predicted from the grey relational grade derived from the grey relational analysis. The optimization results indicate that grinding with the SG wheel under cryogenic cooling gives a better performance. The cooling environment is the most significant factor for effective grinding performance. The surface roughness reduced by 4.9%, MRR improved by 20%, and the grinding forces reduced by 2.2% realized from the confirmation experiment. The optimal results show that the Taguchi-Grey relational analysis was successful in improving the grinding performance.Keywords
This publication has 8 references indexed in Scilit:
- Optimization of the Cryogenic Treatment Process for En 52 Valve Steel Using the Grey-Taguchi MethodMaterials and Manufacturing Processes, 2010
- Multi-response optimisation of sintering parameters of Al–Si alloy/fly ash composite using Taguchi method and grey relational analysisThe International Journal of Advanced Manufacturing Technology, 2009
- Effects of abrasive type cooling mode and peripheral grinding wheel speed on the AISI D2 steel ground surface integrityInternational Journal of Machine Tools and Manufacture, 2009
- Tribological Performance Optimization of Electroless Ni–P Coatings Using the Taguchi Method and Grey Relational AnalysisTribology Letters, 2007
- Experimental investigation on performance of touch-dressed single-layer brazed cBN wheelsInternational Journal of Machine Tools and Manufacture, 2007
- Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi methodThe International Journal of Advanced Manufacturing Technology, 2007
- Effects of the cryogenic cooling on the fatigue strength of the AISI 304 stainless steel ground componentsCryogenics, 2006
- The effect of cryogenic cooling on grinding forcesInternational Journal of Machine Tools and Manufacture, 1996