Influence of wood anatomy on fiber orientation measurement obtained by laser scanning on five European species
Authors:
Open Access
- 21 October 2020
- journal article
- research article
- Published by Springer Nature in Journal of Wood Science
- Vol. 66 (1) , 1-12
Abstract
In order to obtain high production rates of sawn timber, the sawmilling industry can use laser scanning, allowing knot detection and machine strength grading. In particular, laser scanners measure grain angle using the so-called tracheid effect on wood surface where an elliptic scattering of the laser light can be observed. This paper aims to describe the light scattering obtained by a laser beam projection on wood surface and to assess the accuracy of such fiber orientation measurement on five European species. Firstly, fiber orientation measurement error was assessed by rotating samples. Secondly, the description of the scattering effect was done considering ellipse axis ratios and areas. This was studied according to several parameters such as wood surface machining, moisture content, and orthotropic planes of symmetry. Fiber orientation measurement was successfully performed on all the tested species. The measurement error was below 1.6°, except for oak longitudinal–radial (LR) plane showing an error up to 3.1°. For most of the species, the error was higher in LR plane because of the influence of medullary rays. Despite the observation of major variabilities in laser light scattering, it was possible to measure the grain angles with a good accuracy for all investigated species.Keywords
Funding Information
- Ducerf Groupe
- Association Nationale de la Recherche et de la Technologie
- Conseil régional de Bourgogne-Franche-Comté
This publication has 12 references indexed in Scilit:
- Contactless moisture content measurement on green veneer based on laser light scattering patternsWood Science and Technology, 2020
- TRACHEID EFFECT SCANNING AND EVALUATION OF IN-PLANE AND OUT-OF-PLANE FIBER DIRECTION IN NORWAY SPRUCE TIMBERWood and Fiber Science, 2018
- Automatic measurement of wood fiber orientation and knot detection using an optical system based on heating conductionOptics Express, 2015
- Improving strength grading of timber by grain angle measurement and mechanical modelingWood Material Science & Engineering, 2014
- Prediction of timber bending strength and in-member cross-sectional stiffness variation on the basis of local wood fibre orientationEuropean Journal of Wood and Wood Products, 2013
- Light propagation in dry and wet softwoodOptics Express, 2008
- On-line determination of the grain angle using ellipse analysis of the laser light scattering pattern imageJournal of Wood Science, 2004
- Determination of wood grain direction from laser light scattering patternOptics and Lasers in Engineering, 2004
- Automatic measurement of fiber orientation in softwoods by using the tracheid effectComputers and Electronics in Agriculture, 2003
- Ellipse detection and phase demodulation for wood grain orientation measurement based on the tracheid effectOptics and Lasers in Engineering, 2003