The double porogen approach as a new technique for the fabrication of interconnected poly(L-lactic acid) and starch based biodegradable scaffolds
- 1 February 2007
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science: Materials in Medicine
- Vol. 18 (2) , 185-193
Abstract
One of the most widely used fabrication methods of three dimensional porous scaffolds involves compression moulding of a polymer salt mixture, followed by salt leaching. However, the scaffolds prepared by this technique have typically limited interconnectivity. In this study, besides salt particles, an additional polymeric porogen, poly(ethylene oxide), PEO, was added to poly(L-lactic acid), PLLA, to enhance the interconnectivity of the scaffolds. Compression moulded specimens were quenched and put into water, where PEO crystallized and phase separated. Following the leaching of PEO fraction, the permeability and interconnectivity among the macropores formed by salt leaching could be observed. The porosities obtained in the prepared scaffolds were between 76 to 86%. Moreover, the highest porosity of 86% was obtained with minimum fraction of total porogen. The water absorption of the porous scaffolds prepared with PEO could vary between 280 to 450% while water uptake of pure PLLA scaffolds was about 93%. The increase of interconnectivity induced by compounding PLLA with PEO could also be obtained in porous PLLA/starch blends and PLLA/hydroxyapatite composites demonstrating the versatility and wide applicability of this preparation protocol. The simplicity of this organic solvent free preparation procedure of three-dimensional porous scaffolds with high interconnectivity and high surface area to volume ratio holds a promise for several tissue engineering applications.Keywords
This publication has 27 references indexed in Scilit:
- Effect of starch-based biomaterials on the in vitro proliferation and viability of osteoblast-like cellsJournal of Materials Science: Materials in Medicine, 2005
- Mechanical properties of glass-ceramic A–W-polyethylene composites: effect of filler content and particle sizeBiomaterials, 2004
- Aging of poly(lactide)/poly(ethylene glycol) blends. Part 2. Poly(lactide) with high stereoregularityPolymer, 2003
- Injectable drug‐delivery systems based on supramolecular hydrogels formed by poly(ethylene oxide)s and α‐cyclodextrinJournal of Biomedical Materials Research Part A, 2003
- Vascular cell responses to polysaccharide materials:Biomaterials, 2000
- Growth of continuous bonelike mineral within porous poly(lactide-co-glycolide) scaffoldsin vitroJournal of Biomedical Materials Research, 2000
- A novel method to fabricate bioabsorbable scaffoldsPolymer, 1995
- Initial bone matrix formation at the hydroxyapatite interface in vivoJournal of Biomedical Materials Research, 1995
- Preparation and characterization of poly(l-lactic acid) foamsPolymer, 1994
- Solutions able to reproduce in vivo surface‐structure changes in bioactive glass‐ceramic A‐W3Journal of Biomedical Materials Research, 1990