Highly Stable Metal─Na0.02Pb0.98Te Contacts for Medium Temperature Thermoelectric Devices
- 28 April 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (18) , 22231-22240
Abstract
In the medium temperature (600-850 K) range, Na0.02Pb0.98Te is a highly efficient p-type thermoelectric compound. Device fabrication utilizing this compound for power generation demands highly stable low-contact resistance contacts with metal electrodes. This work investigates the microstructural, electrical, mechanical, and thermochemical stability of Na0.02Pb0.98Te-metal (Ni, Fe, and Co) contacts made by a one-step vacuum hot pressing process. Direct contact mostly resulted in either an interface with poor mechanical integrity, as in Co and Fe, or poisoning of the TE compound, as in the case of Ni, which results in high specific contact resistance (rc). In Ni and Co, adding a SnTe interlayer lowers the rc and strengthens the contact. It does not, however, effectively stop Ni from diffusing into Na0.02Pb0.98Te. The bonding is poor in the Fe/SnTe/Na0.02Pb0.98Te contacts due to the absence of any reaction at the Fe/SnTe interface. A composite buffer layer Co + 75 vol % SnTe with SnTe improves the mechanical stability of the Co contact with moderately lesser rc than pure SnTe alone. However, a similar approach with Fe does not yield stable contact. The Co/Co + 75 vol % SnTe/SnTe/Na0.02Pb0.98Te contact exhibits rc less than 50 μΩ cm2 and has good microstructural and mechanical stability after annealing at 723 K for 170 h.Keywords
Funding Information
- Department of Science and Technology, Ministry of Science and Technology, India (AI/1/65/ARCI/2014)
This publication has 42 references indexed in Scilit:
- Large enhancement in the thermoelectric properties of Pb0.98Na0.02Te by optimizing the synthesis conditionsJournal of Materials Chemistry A, 2013
- High thermoelectric figure of merit in heavy hole dominated PbTeEnergy & Environmental Science, 2011
- Thermoelectric enhancement in PbTe with K or Na codoping from tuning the interaction of the light- and heavy-hole valence bandsPhysical Review B, 2010
- Development of low resistance electrical contacts for thermoelectric devices based on n-type PbTe and p-type TAGS-85 ((AgSbTe2)0.15(GeTe)0.85)Journal of Physics D: Applied Physics, 2008
- Phase relations in pseudobinary systems of germanium, tin, and lead chalcogenidesInorganic Materials, 2006
- The Fe-Te (Iron-Tellurium) systemBulletin of Alloy Phase Diagrams, 1990
- Thermal Expansion of Tin TellurideJournal of Applied Physics, 1970
- Estimation of the chemical compatibility of alloys with lead telluride and tin telluride thermoelectric materialsEnergy Conversion, 1968
- The compatibility of lead and tin telluride with metalsAdvanced Energy Conversion, 1968
- The Diffusion of Nickel and Chlorine into P-Type Lead Telluride at 700°CJournal of the Electrochemical Society, 1968