Oxidative Layer-By-Layer Multilayers Based on Metal Coordination: Influence of Intervening Graphene Oxide Layers
Open Access
- 2 October 2018
- journal article
- research article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 34 (44) , 13171-13182
Abstract
Layer-by-layer (LbL) fabricated oxidative multilayers consisting of successive layers of inorganic polyphosphate (PP) and Ce(IV) can electrolessly form thin conducting polymer films on their surface. We describe the effect of substituting every second PP layer in the (PP/Ce) multilayers for graphene oxide (GO) as a means of modifying the structure and mechanical properties of these (GO/Ce/PP/Ce) films, and enhancing their growth. Both types of LbL films are based on reversible coordinative bonding between the metal ions and the oxygen-bearing groups in PP and GO, instead of purely electrostatic interactions. The GO incorporation leads to the doubling of the areal mass density and to a dry film thickness close to 300 nm after 4 (GO/Ce/PP/Ce) tetralayers. The film roughness increases significantly with thickness. The (PP/Ce) films are soft materials with approximately equal shear storage and loss moduli but the incorporation of GO doubles the storage modulus. Polyphosphate displays a marked terminating layer effect and practically eliminates mechanical losses, making the (GO/Ce/PP/Ce) films almost pure soft elastomers. The smoothness of the (PP/Ce) films and the PP-termination effects are attributed to the reversible coordinative bonding. The (GO/Ce/PP/Ce) films oxidize pyrrole and 3,4-ethylenedioxythiophene (EDOT) and form polypyrrole and PEDOT films on their surfaces. These polymer films are considerably thicker than those formed using the (PP/Ce) multilayers with the same nominal amount of cerium layers. The GO sheets interfere with the polymerization reaction and make its kinetics biphasic. The (GO/Ce) multilayers without PP are brittle and thin.Keywords
Funding Information
- Graduate School of Materials Research, ?bo Akademi University
This publication has 85 references indexed in Scilit:
- pH-induced metal-ligand cross-links inspired by mussel yield self-healing polymer networks with near-covalent elastic moduliProceedings of the National Academy of Sciences, 2011
- Iron-Clad Fibers: A Metal-Based Biological Strategy for Hard Flexible CoatingsScience, 2010
- Computational Studies of the Structure, Behavior upon Heating, and Mechanical Properties of Graphite OxideThe Journal of Physical Chemistry C, 2007
- Counteranion-Controlled Properties of Polyelectrolyte MultilayersMacromolecules, 2004
- Direct Evidence for Vertical Diffusion and Exchange Processes of Polyanions and Polycations in Polyelectrolyte Multilayer FilmsMacromolecules, 2004
- Effect of Polyelectrolyte Multilayers on the Response of a Quartz Crystal MicrobalanceAnalytical Chemistry, 2003
- Fabrication of Highly Ordered Multilayer Films Using a Spin Self-Assembly MethodAdvanced Materials, 2001
- A New Approach to the Fabrication of a Self-Organizing Film of Heterostructured Polymer/Cu2S NanoparticlesAdvanced Materials, 1998
- Verwendung von Schwingquarzen zur W gung d nner Schichten und zur Mikrow gungThe European Physical Journal A, 1959
- Structure and Properties of the Condensed Phosphates. XI. Hydrolytic Degradation of Graham's SaltJournal of the American Chemical Society, 1956