Enhancing Frost Durability of Cement-Stabilized Silty Clay: Experimental Evaluation and Prediction Model Development
Open Access
Abstract
Ensuring the long-term performance of infrastructure in cold regions necessitates evaluating the frost durability of subgrade materials. This study comprehensively investigates the mechanical behavior of cement-stabilized silty clay, a common material for subgrade improvement, under freeze–thaw (F–T) cycles. A series of unconfined compressive strength (UCS) and resilient modulus (MR) tests were conducted to quantify the effects of cement content (3%, 6%, 9%), initial moisture content (OMC − 2% to OMC + 6%), and the number of F–T cycles (0 to 9). The results demonstrate that increasing the cement content significantly enhances the MR, with the most effective improvement observed up to 6%. Specifically, increasing cement from 3% to 6% boosted MR by 11.62% to 26.69%, while a further increase to 9% yielded a smaller gain of 4.59% to 12.60%, indicating an optimal content. Both UCS and MR peak at the optimum moisture content (OMC) and degrade markedly with F–T cycles, with the first cycle causing over 50% of the total MR loss in most cases. Properties tend to stabilize after approximately six cycles. The stabilized soil exhibits superior performance, with its MR being 2.29–2.43 times that of the original soil at OMC after nine F–T cycles. Furthermore, a logarithmic model (R2 = 0.87–0.94) effectively captures the attenuation of MR with F–T cycles, while a strong linear relationship (R2 = 0.90–0.96) exists between the initial moisture content and the degradation coefficient. An empirical predictive model for UCS, integrating cement content, moisture content, and F–T cycles, is proposed and shows excellent correlation with experimental data (R2 > 0.92). Microstructural analysis reveals that the enhancement mechanism is attributed to hydration, cation exchange, and flocculation, which collectively form a stable cementitious network. The findings and proposed models provide critical quantitative insights for optimizing the design of frost-resistant cement-stabilized subgrades, thereby contributing to the enhanced durability and performance of overlying structures in seasonal freeze–thaw environments.Keywords
Funding Information
- Zhejiang Institute of Communications (2025rcxm25)
This publication has 33 references indexed in Scilit:
- Shear behavior of cement-stabilized silty clay exposed to low-temperature curingCold Regions Science and Technology, 2024
- Carbon Fabric Reinforced Cementitious Mortar confinement of concrete cylinders: the matrix effect for multi-ply wrappingComposite Structures, 2024
- Generalized strength prediction equation for cement stabilized clayey soilsApplied Clay Science, 2022
- Twenty-two-year investigation of strength development and surface deterioration of cement-treated clay in an in-situ field testCement and Concrete Composites, 2022
- Mechanical Properties and Structural Evolution of Sludge-cured Lightweight Soils Subjected to Freeze-thaw CyclesKSCE Journal of Civil Engineering, 2022
- Effects of freeze-thaw cycles on the mechanical properties of cement-fiber composite treated silty clayConstruction and Building Materials, 2022
- Freeze–thaw durability of cement-stabilized macadam subgrade and its compaction quality indexCold Regions Science and Technology, 2019
- Improvement of mechanical behavior of cemented soil reinforced with waste cornsilk fibersConstruction and Building Materials, 2018
- Analysis of strength development in cement-stabilized silty clay from microstructural considerationsConstruction and Building Materials, 2010
- Performance of compacted cement-stabilised soilCement and Concrete Composites, 2004