Pitting Corrosion of Steam Turbine Blading Steels: The Influence of Chromium Content, Temperature, and Chloride Ion Concentration
- 1 March 2006
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 62 (3) , 231-242
Abstract
Two industry-standard steam turbine blading steels, FV566 containing 11% Cr and FV520B containing 13.5% Cr by weight, are characterized with respect to chloride-induced pitting corrosion using potentiodynamic polarization measurements and the scanning vibrating electrode technique (SVET). In deaerated aqueous sodium chloride (NaCl), at near-neutral pH, both alloys exhibit a dependence of pitting potential (Eb) on chloride concentration ([Cl–]) such that Eb = A + B log 10[Cl–]. The quantity B is temperature (T) independent and A decreases linearly with increasing T. Similar B values of –139 ± 8 mV/decade and –141 ± 9 mV/decade, and similar dA/dT slopes of –3.9 ± 0.2 mV/K and –3.8 ± 0.4 mV/K, are found for 11Cr and 13.5Cr, respectively. However, A for 13.5Cr remains ca. 0.25 V higher than for 11Cr throughout. At 20°C and under nonpolarized, aerated conditions, 13.5Cr shows no evidence of pitting, even when [Cl–] is 5 mol/dm3. Conversely, stable pitting commences on 11Cr within 1 h of immersion at [Cl–] ≥ 1 mol/dm3. Each pit emits a steadily increasing anodic current over 24 h, and pit number density increases from 1 cm–2 to 4 cm–2 as [Cl–] is increased from 1 mol/dm3 to 5 mol/dm3. However, the total (sum) anodic current-time characteristic is independent of both [Cl–] and pit density. The anodic currents detected imply that pit radii of ca. 100 μm may be attained within 12 h of immersion.Keywords
This publication has 41 references indexed in Scilit:
- Three-dimensional modelling of selective dissolution and passivation of iron–chromium alloysCorrosion Science, 2002
- Micro- and nanotechniques to study localized corrosionElectrochimica Acta, 1995
- Aspects of the effects of electrolyte composition on the occurrence of metastable pitting on stainless steelCorrosion Science, 1994
- The initiation of pitting corrosion at MnS inclusionsCorrosion Science, 1993
- The dissolution and repassivation kinetics of Fe-Cr alloys in pit solutionsCorrosion Science, 1993
- The influence of pH and chloride concentration on the corrosion behaviour of AISI 316L steel in aqueous solutionsCorrosion Science, 1992
- The initiation of pitting corrosion on austenitic stainless steel: on the role and importance of sulphide inclusionsCorrosion Science, 1992
- The localized breakdown and repair of passive surfaces during pittingCorrosion Science, 1989
- Validation of a percolation model for passivation of Fe-Cr alloys: I current efficiency in the incompletely passivated stateCorrosion Science, 1988
- The measurement of the galvanic corrosion of soldered copper using the scanning vibrating electrode techniqueCorrosion Science, 1988