Aerial manipulation robot composed of an autonomous helicopter and a 7 degrees of freedom industrial manipulator
Authors:
- 1 May 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10504729,p. 2107-2112
Abstract
This paper is devoted to a system for aerial manipulation, composed of a helicopter and an industrial manipulator. The usage of an industrial manipulator is motivated by practical applications which were identified in different cooperation projects with the industry. We address the coupling between manipulator and helicopter and show that even in case when we have an ideal controller for manipulator and a highperformance controller for helicopter, an unbounded energy flow can be generated by internal forces between helicopter and manipulator if both controllers are used independently. To solve this problem we propose a new kinematical coupling for control by introducing an additional manipulation DoF realized by helicopter rotation around its yaw axis. The new experimental setup and required modifications in the manipulator controller for this purpose are described. Further, we propose dynamical coupling which is implemented by modification of the helicopter controller feeding the interaction force/torque, measured between manipulator base and fuselage, directly to the actuators of the rotor blades. At the end, we present experimental results for aerial manipulation and their analysis.Keywords
This publication has 8 references indexed in Scilit:
- First analysis and experiments in aerial manipulation using fully actuated redundant robot arm2013
- Exploiting redundancy in Cartesian impedance control of UAVs equipped with a robotic arm2012
- MM-UAV: Mobile Manipulating Unmanned Aerial VehicleJournal of Intelligent & Robotic Systems, 2011
- Autonomous transportation and deployment with aerial robots for search and rescue missionsJournal of Field Robotics, 2011
- Design, modeling, estimation and control for aerial grasping and manipulation2011
- Grasping from the air: Hovering capture and load stability2011
- Autonomously Flying VTOL-Robots: Modeling and ControlProceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164), 2007
- A Unified Passivity-based Control Framework for Position, Torque and Impedance Control of Flexible Joint RobotsThe International Journal of Robotics Research, 2007