Effects of SF6 Addition to O2 Plasma on Polyimide Etching
Authors:
- Sang Hoon KimSKSang Hoon Kim
- Sang-Gyun WooSWSang-Gyun Woo
- Jinho AhnJAJinho Ahn
- 1 December 2000
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 39 (12S)
Abstract
For further scaling down of silicon devices, the application of low-k interlayer dielectrics instead of silicon oxide has been considered to reduce power consumption, crosstalk and interconnection delay. In this paper, the effect of SF6/O2 plasma chemistry on the etching characteristics of polyimide has been studied using a electron cyclotron resonance (ECR) plasma etching system. Addition of SF6 gas results in a very smooth etched surface even though this causes a reduced etch rate due to the formation of nonvolatile fluorine compounds inhibiting the reaction between oxygen and hydrocarbon polymers. However, the etch rate can be compensated by applying a substrate bias or increasing the microwave power. As a result, 1–2 µm line and space patterns were successfully obtained using a SiO2 hard mask.Keywords
This publication has 10 references indexed in Scilit:
- Study on the Properties of Interlayer Low Dielectric Polyimide during Cl-Based Plasma Etching of AluminumJapanese Journal of Applied Physics, 1999
- Effects of oxygen and fluorine on the dry etch characteristics of organic low-k dielectricsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1999
- Anisotropic patterning of copper-laminated polyimide foils by plasma etchingSurface and Coatings Technology, 1997
- Damascene copper interconnects with polymer ILDsThin Solid Films, 1997
- Oxygen Plasma Reactive Ion Etching of Tetrahedral Amorphous CarbonJapanese Journal of Applied Physics, 1996
- Changes in refractive index and in chemical state of synchrotron radiation irradiated fluorinated polyimide filmsJournal of Vacuum Science & Technology A, 1996
- Fine‐Line Patterning of Parylene‐n by Reactive Ion Etching for Application as an Interlayer DielectricJournal of the Electrochemical Society, 1996
- Reactive ion etching of vapor phase deposited polyimide films in : effect on surface morphologyThin Solid Films, 1996
- Dielectric behavior of O2/CF4 plasma etched polyimide exposed to humid environmentsJournal of Vacuum Science & Technology A, 1993
- Fourier transform infrared studies of polyimide and poly(methyl-methacrylate) surfaces during downstream microwave plasma etchingJournal of Vacuum Science & Technology A, 1991