Low temperature coefficient and low line sensitivity subthreshold curvature‐compensated voltage reference
- 12 August 2020
- journal article
- research article
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 48 (11) , 1900-1921
Abstract
Summary: A high‐order curvature‐compensated subthreshold voltage reference is proposed in this paper. The proposed curvature‐compensated voltage reference consists of two supply‐independent first‐order voltage references and a curvature compensation circuit. The supply‐independent first‐order voltage reference uses a negative feedback loop which improves the line sensitivity and eliminates the demand of operational amplifier, whereas the curvature compensation circuit provides high‐order temperature‐compensated output reference voltage. The proposed curvature‐compensated voltage reference provides an output reference voltage of 118.54 mV with a temperature coefficient of 21.5 ppm/°C over a wide temperature range of −60°C to 120°C. The power supply rejection ratio and line sensitivity are observed as −68.64 dB (for the frequency range of 1 Hz to 100 Hz) and 0.035%/V (for the supply voltage varies from 0.85 V to 2.5 V), respectively. The values of output noise at the frequencies of 1 kHz and 10 kHz without using any capacitive filter are obtained as 179.13 nV/ √ Hz and 123.87 nV/ √ Hz, respectively.Keywords
This publication has 42 references indexed in Scilit:
- Subthreshold CMOS voltage reference circuit with body bias compensation for process variationIET Circuits, Devices & Systems, 2012
- A Novel Wide-Temperature-Range, 3.9 ppm/$^{\circ}$C CMOS Bandgap Reference CircuitIEEE Journal of Solid-State Circuits, 2011
- A high-order curvature compensation technique for bandgap voltage reference using subthreshold MOSFETsInternational Journal of Electronics, 2010
- A 1.2-V Piecewise Curvature-Corrected Bandgap Reference in 0.5 $\mu$m CMOS ProcessIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2010
- Sub 1 V CMOS bandgap reference design techniques: a surveyAnalog Integrated Circuits and Signal Processing, 2009
- A low-voltage low-power voltage reference based on subthreshold MOSFETsIEEE Journal of Solid-State Circuits, 2003
- A CMOS voltage reference based on weighted ΔV/sub GS/ for CMOS low-dropout linear regulatorsIEEE Journal of Solid-State Circuits, 2003
- A CMOS bandgap reference without resistorsIEEE Journal of Solid-State Circuits, 2002
- Mutual compensation of mobility and threshold voltage temperature effects with applications in CMOS circuitsIEEE Transactions on Circuits and Systems I: Regular Papers, 2001
- A CMOS bandgap reference circuit with sub-1-V operationIEEE Journal of Solid-State Circuits, 1999