Development and application of an off-line soft reduction model during continuous casting of high-carbon rectangular billet
Authors:
- 12 August 2015
- journal article
- research article
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 112 (4) , 403
Abstract
An off-line soft reduction model was developed in order to improve the inner quality of high-carbon rectangular billet, which includes a heat transfer model, cooling water control model and roll-gap calculation model. The distribution of the total reduction amount in each pinch roll is calculated by using a segmented slope method in the reduction zone. The model application results showed that the inner quality of the high-carbon 82B steel with a section size of 180 mm × 240 mm had clearly been improved. It is evident that the formation of V-segregation in a rectangular billet subjected to soft reduction is suppressed and the centerline shrinkage cavity is clearly decreased. The mean center carbon segregation index was reduced from 1.15 to 1.08 with soft reduction. Besides, the soft reduction process improved the compactness and homogeneity of the central equiaxed dendrite zone and decreased the secondary dendrite arm spacing.Keywords
This publication has 21 references indexed in Scilit:
- Morphology and Segregation in Continuously Cast High Carbon Steel BilletsISIJ International, 2007
- Improvement of center segregation in high-carbon steel billets using soft reductionJournal of University of Science and Technology Beijing, Mineral, Metallurgy, Material, 2006
- Numerical Simulation of Solidification Structure Formation during Continuous Casting in Fe-0.7mass%C Alloy Using Cellular Automaton MethodISIJ International, 2006
- Solidification, segregation, and banding in carbon and alloy steelsMetallurgical and Materials Transactions B, 2003
- Our Understanding of Macrosegregation. Past and Present.ISIJ International, 2000
- The Effect of Soft Reduction on Center Segregation in C.C. Slab.ISIJ International, 1996
- J1995
- On the formation of pipes and centerline segregates in continuously cast billetsMetallurgical and Materials Transactions B, 1994
- On the Solidification of Steel Ingots and Continuously Cast Steel Billets and SlabsCanadian Metallurgical Quarterly, 1991
- Influence of Soft Reduction with One-piece Rolls on Center Segregation in Continuously Cast Slabs.ISIJ International, 1991