Reliable thin-film encapsulation of flexible OLEDs and enhancing their bending characteristics through mechanical analysis
- 19 April 2016
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (47) , 40835-40843
Abstract
Thin film encapsulation of flexible organic light-emitting diodes (FOLEDs) with a moisture barrier, incorporating a silica nanoparticle-embedded sol–gel organic–inorganic hybrid nanocomposite (S–H nanocomposite) and Al2O3 were demonstrated, and their reliability and mechanical characteristics were assessed. The bending stress of the multi-layer structure for both the case of moisture barriers and encapsulated FOLEDs was investigated based on nonlinear finite-element analysis (FEA). To minimize the bending stress at the desired region, the neutral axis (NA) position could be strategically adjusted by the introduction of a buffer layer of UV-curable cycloaliphatic epoxy hybrid materials (hybrimer), synthesized via a sol–gel reaction. The optimized multi-layer structure, proposed as a result of FEA was validated by related experiments. Regarding the bending characteristics of the moisture barrier structure, the water vapor transmission rate (WVTR) of the hybrimer-coated moisture barrier was much lower than that of a non-coated sample, as a result of calcium corrosion tests after bending. The structure of encapsulated FOLEDs, which are coated by the hybrimer achieved an almost identical performance to that of non-bending samples in spite of 30 days exposure to 30 °C and 90% R.H. after a bending test with a radius of 1 cm. During this period, the occurrence of dark spots caused by moisture penetration was effectively suppressed. Collectively, these results suggest that the bending characteristics of hybrimer-coated multi-layer structures are remarkably improved with the theoretical prediction of the NA position.Keywords
This publication has 30 references indexed in Scilit:
- Transparent Nanopaper‐Based Flexible Organic Thin‐Film Transistor ArrayAdvanced Functional Materials, 2013
- Biodegradable transparent substrates for flexible organic-light-emitting diodesEnergy & Environmental Science, 2013
- Extremely efficient flexible organic light-emitting diodes with modified graphene anodeNature Photonics, 2012
- Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post‐Treatment for ITO‐Free Organic Solar CellsAdvanced Functional Materials, 2011
- Al2O3/ZrO2 Nanolaminates as Ultrahigh Gas‐Diffusion Barriers—A Strategy for Reliable Encapsulation of Organic ElectronicsAdvanced Materials, 2009
- Highly flexible and transparent InZnSnOx∕Ag∕InZnSnOx multilayer electrode for flexible organic light emitting diodesApplied Physics Letters, 2008
- Gas Diffusion Barriers on Polymers Using Multilayers Fabricated by Al2O3 and Rapid SiO2 Atomic Layer DepositionThe Journal of Physical Chemistry C, 2008
- Ca test of Al2O3 gas diffusion barriers grown by atomic layer deposition on polymersApplied Physics Letters, 2006
- Gas diffusion barriers on polymers using Al2O3 atomic layer depositionApplied Physics Letters, 2006
- Reliability and degradation of organic light emitting devicesApplied Physics Letters, 1994