Forced Oscillations in Combustors With Spray Atomizers
Authors:
- 1 March 1999
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 124 (1) , 20-30
Abstract
Most types of combustion-driven devices experience combustion instabilities. For aeroengine combustors, the frequency of this oscillation is typically in the range 60–120 Hz and is commonly called “rumble.” The rumble oscillations involve coupling between the air and fuel supplies and unsteady flow in the combustor. Essentially pressure fluctuations alter the inlet fuel and air, thereby changing the rate of combustion, which at certain frequencies further enhances the pressure perturbation and so leads to self-excited oscillations. The large residence time of the liquid fuel droplets, at idle and subidle conditions, means that liquid and gaseous phases must both be considered. In the present work, we use a numerical model to investigate the forced unsteady combustion due to specified time-dependent variations in the fuel and air supplies. Harmonic variations in inlet air and fuel flows have been considered and the resulting unsteady combustion calculated. The influence of droplet size distribution has also been investigated. The calculations provide insight into the interaction between atomization, unsteady combustion, and flow oscillations.Keywords
This publication has 5 references indexed in Scilit:
- PDF Modelling of Spray Autoignition in High Pressure Turbulent FlowsCombustion Science and Technology, 1996
- Calculation of Two-Phase Flow in Gas Turbine CombustorsJournal of Engineering for Gas Turbines and Power, 1995
- The calculation of thermoacoustic oscillationsJournal of Sound and Vibration, 1995
- Atomization and Sprays1988
- Aspects of Computer Simulation of Liquid-Fueled CombustorsJournal of Energy, 1983