Thick LiCoO2/Nickel Foam Cathode Prepared by an Adhesive and Water-Soluble PEG-Based Copolymer Binder
Authors:
- 1 January 2012
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 159 (12) , A1928-A1933
Abstract
We report the first aqueous process fabrication of thick, flexible, and fully compressed lithium ion battery cathodes exceeding 200 μm in thickness using an adhesive, elastomeric, and ionically conductive PEG-based copolymer binder. The binder was synthesized through the statistical copolymerization of poly(ethylene glycol) methyl ether methacrylates (PEGMA), methyl methacrylate (MMA), and isobutyl vinyl ether (IBVE) in optimal proportions. Using standard LiCoO2 as active material, dense and flexible cathode films can withhold active mass loadings over 30 mg/cm2 which deliver 4.53 mAh/cm2 with 94% capacity retention at C/2-rate. Electrodes were fabricated by casting aqueous cathode slurries onto nickel foam, followed by drying and hard calendar compression at 10 tons/cm2. Coordinating the binder with lithium salt plays a crucial role in activating the cathode.Keywords
This publication has 36 references indexed in Scilit:
- Influence of the binder types on the electrochemical characteristics of tin nanoparticle negative electrode for lithium secondary batteriesJournal of Power Sources, 2012
- CMC as a binder in LiNi0.4Mn1.6O4 5V cathodes and their electrochemical performance for Li-ion batteriesElectrochimica Acta, 2012
- Lithium polyacrylate as a binder for tin–cobalt–carbon negative electrodes in lithium-ion batteriesElectrochimica Acta, 2010
- Key Parameters Governing the Reversibility of Si/Carbon/CMC Electrodes for Li-Ion BatteriesChemistry of Materials, 2009
- Preparation and performances of LiFePO4 cathode in aqueous solvent with polyacrylic acid as a binderJournal of Power Sources, 2009
- Design of Aqueous Processed Thick LiFePO[sub 4] Composite Electrodes for High-Energy Lithium BatteryJournal of the Electrochemical Society, 2009
- A review of processes and technologies for the recycling of lithium-ion secondary batteriesJournal of Power Sources, 2008
- On the binding mechanism of CMC in Si negative electrodes for Li-ion batteriesElectrochemistry Communications, 2007
- Electrochemical performance of Li2FeSiO4 as a new Li-battery cathode materialElectrochemistry Communications, 2005
- Effect of Carboxymethyl Cellulose on Aqueous Processing of Natural Graphite Negative Electrodes and their Electrochemical Performance for Lithium BatteriesJournal of the Electrochemical Society, 2005