Electrochemical Characterization of Electrospun Nanocomposite Polymer Blend Electrolyte Fibrous Membrane for Lithium Battery
- 13 April 2015
- journal article
- research article
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 119 (16) , 5299-5308
Abstract
Novel hybrid (organic/inorganic) electrospun nanocomposite polymer blend electrolyte fibrous membranes with the composition poly(vinylidene difluoride-co-hexafluoropropylene) [P(VdF-co-HFP)]/poly(methyl methacrylate) [P(MMA)]/magnesium aluminate (MgAl2O4)/LiPF6 were prepared by the electrospinning technique. All of the prepared electrospun P(VdF-co-HFP), PMMA blend [90% P(VdF-co-HFP)/10% PMMA], and nanocomposite polymer blend [90% P(VdF-co-HFP)/10% PMMA/x wt % MgAl2O4 (x = 2, 4, 6, and 8)] fibrous membranes were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy. The fibrous nanocomposite separator-cum-polymer blend electrolyte membranes were obtained by soaking the nanocomposite polymer blend membranes in an electrolyte solution containing 1 M LiPF6 in ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1, v/v). The newly developed fibrous nanocomposite polymer blend electrolyte [90% P(VdF-co-HFP)/10% PMMA/6 wt % MgAl2O4/LiPF6] membrane showed a low crystallinity, low average fiber diameter, high thermal stability, high electrolyte uptake, high conductivity (2.60 × 10–3 S cm–1) at room temperature, and good potential stability above 4.5 V. The best properties of the fibrous nanocomposite polymer blend electrolyte (NCPBE) membrane with a 6 wt % MgAl2O4 filler content was used for the fabrication of a Li/NCPBE/LiCoO2 CR 2032 coin cell. The electrochemical performance of the fabricated CR 2032 cell was evaluated at a current density of 0.1 C-rate. The fabricated CR 2032 cell lithium battery using the newly developed NCPBE membrane delivered an initial discharge capacity of 166 mAh g–1 and a stable cycle performance.Keywords
Funding Information
- Department of Science and Technology, Ministry of Science and Technology
- Council of Scientific and Industrial Research
- All India Council for Technical Education
- University Grants Commission
- Department of Atomic Energy, Government of India
- Defence Research and Development Organisation
This publication has 53 references indexed in Scilit:
- Materials for Rechargeable Lithium-Ion BatteriesAnnual Review of Chemical and Biomolecular Engineering, 2012
- Lithium ion battery productionThe Journal of Chemical Thermodynamics, 2012
- Lithium batteries: Status, prospects and futureJournal of Power Sources, 2010
- Building better batteriesNature, 2008
- A review on the separators of liquid electrolyte Li-ion batteriesJournal of Power Sources, 2007
- Battery SeparatorsChemical Reviews, 2004
- Nanotechnology for the progress of lithium batteries R&DJournal of Power Sources, 2004
- Issues and challenges facing rechargeable lithium batteriesNature, 2001
- Polymer Electrolytes Reinforced by Celgard® MembranesJournal of the Electrochemical Society, 1995
- Challenge of portable powerNature, 1995