Compact ultra-wideband bandpass filter using broadside coupled hairpin structures on multilayer liquid crystal polymer substrate
- 25 September 2008
- journal article
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 44 (20) , 1197-1198
Abstract
A novel ultra-wideband (UWB) bandpass filter (BPF) using a broadside-coupled hairpin structure and multilayer organic liquid crystal polymer (LCP) technology is presented. To suppress stopband harmonic response, folded stepped impedance structures were adopted as hairpin resonators in the design. The proposed filter has been investigated numerically and experimentally. Multilayer LCP technology was used to implement designed UWB BPF. Good agreement between simulated and measured results of the proposed filter was observed. They show that the fabricated UWB BPF has a good performance, including a small insertion loss, a flat group delay with a variation within 0.1 ns in most of its passband, a wide stopband from 11.0–20.0 GHz with a high rejection level up to 20.0 dB, and a very compact size of 9.8×7.5 mm (0.36 λg×0.27λg, where λg is the guided wavelength of 50 Ω microstrip line at 6.85 GHz).Keywords
This publication has 5 references indexed in Scilit:
- Application of Electromagnetic Bandgaps to the Design of Ultra-Wide Bandpass Filters With Good Out-of-Band PerformanceIEEE Transactions on Microwave Theory and Techniques, 2006
- Compact Ultra-Wideband Bandpass Filters Using Composite Microstrip–Coplanar-Waveguide StructureIEEE Transactions on Microwave Theory and Techniques, 2006
- Ultra-wideband (UWB) bandpass filters using multiple-mode resonatorIEEE Microwave and Wireless Components Letters, 2005
- Characterization of Liquid Crystal Polymer (LCP) Material and Transmission Lines on LCP Substrates From 30 to 110 GHzIEEE Transactions on Microwave Theory and Techniques, 2004
- Microstrip Filters for RF/Microwave Applications2001