Consideration of the Actual Current-Spreading Length of GaN-Based Light-Emitting Diodes for High-Efficiency Design
Authors:
- Hyunsoo KimHKHyunsoo Kim
- Jaehee ChoJCJaehee Cho
- Jeong Wook LeeJLJeong Wook Lee
- Sukho YoonSYSukho Yoon
- Hyungkun KimHKHyungkun Kim
- Cheolsoo SoneCSCheolsoo Sone
- Yongjo ParkYPYongjo Park
- Tae-Yeon SeongTSTae-Yeon Seong
- 9 July 2007
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 43 (8) , 625-632
Abstract
Based on the proposed experimental method, the current spreading length of GaN-based light-emitting diodes (LEDs) was measured and analyzed for practical device design. In this study, Thompson's and Guo's models, which are categorized according to vertical series resistance (in particular, p-type contact resistance), were used to extract device parameters. It was shown that the measured current spreading length strongly depends on the injected current density. For LEDs fabricated with low-resistance p-type contacts, this behavior could be explained in terms of the accelerated current crowding with higher current densities occurring as a result of the reduced voltage drop across the junction, which is in good agreement with Thompson's relation. However, for LEDs fabricated with high-resistance p-contacts, unlike Guo's prediction, the measured current spreading length also showed a strong dependence on the injected current density. This was attributed to thermal heating at the p-contact, resulting in the reduction of the voltage drop across the p-contact and so junction voltage, which is also in agreement with Thompson's model. Based on the measured parameters and the design rule, efficient p-type reflectors, namely, hybrid reflectors were designed. Compared with conventional ones, LEDs fabricated with the hybrid reflectors exhibited better output power at a reasonable forward voltage, indicating that the proposed method is effective in understanding the actual current spreading and hence the practical design of high-efficiency LEDs.Keywords
This publication has 26 references indexed in Scilit:
- High-power deep ultraviolet light-emitting diodes basedon a micro-pixel designApplied Physics Letters, 2004
- Device and circuit modeling of GaN/InGaN light emitting diodes (LEDs) for optimum current spreadingSolid-State Electronics, 2003
- Design and fabrication of highly efficient GaN-based light-emitting diodesIEEE Transactions on Electron Devices, 2002
- Lateral current transport path, a model for GaN-based light-emitting diodes: Applications to practical device designsApplied Physics Letters, 2002
- Current crowding in GaN/InGaN light emitting diodes on insulating substratesJournal of Applied Physics, 2001
- Efficiency of GaN/InGaN light-emitting diodes with interdigitated mesa geometryApplied Physics Letters, 2001
- Effects of current spreading on the performance of GaN-based light-emitting diodesIEEE Transactions on Electron Devices, 2001
- Current crowding and optical saturation effects in GaInN/GaN light-emitting diodes grown on insulating substratesApplied Physics Letters, 2001
- Modeling of a GaN-based light-emitting diode for uniform current spreadingApplied Physics Letters, 2000
- InGaN blue light-emitting diodes with optimized n-GaN layer1999