In the frame of Severe Accidents studies, different ways of mitigation are currently proposed all over the world by the nuclear community. One possible way of mitigation concerns the use of new cladding concepts: the Enhanced Accident Tolerant Fuel (E-ATF) could avoid severe accidents thanks to the increase of a supplementary coping time in comparison with the current cladding such as zircalloy-4. Among the different EATF cladding under development and qualification, the chromium coated zircalloy has shown a high interest for the nuclear industry. The formation of a chromium oxide protective layer has been presented as being very resistant under steam conditions at high temperature. The VITOX facility-PLINIUS severe accident facility at CEA-Cadarache has been recently developed in order to perform experiments simulating severe accidents conditions representative of reactor case from 1600°C till 1970°C under steam non starvation conditions. This paper presents experimental tests, calibration, instrumentation, results and analyses performed in the VITOX facility for EATF (chromium coated zircalloy) and zircalloy-4. Mechanistic oxidation behaviors of both cladding EATF and zircalloy-4 are presented, oxidation kinetics and hydrogen production laws are proposed and discussed.