Enhanced cryogenic thermoelectric cooling of Bi0.5Sb1.5Te3 by carrier optimization
Authors:
Open Access
Abstract
As the best‐performing materials for thermoelectric cooling, Bi2Te3‐based alloys have long attracted attention to optimizing the room‐temperature performance of Bi2Te3 for both power generation and refrigeration applications. This focus leads to less emphasis and fewer reports on the cooling capability below room temperature. Given that the optimal carrier concentration (nopt) for maximizing the cooling power is highly temperature dependent, roughly following the relationship nopt∝T3/2, lowering the carrier concentration is essential to improve the cooling capability at cryogenic temperatures. Taking p‐type Bi0.5Sb1.5Te3 as an example, careful control of doping in this work enables a reduction in carrier concentration to 1.7 × 1019 cm−3 from its optimum at 300 K of 3.4 × 1019 cm−3. This work successfully shifts the temperature at which the thermoelectric figure of merit (zT) peaks down to 315 K, with an average zT as high as 0.8 from 180 to 300 K. Further pairing with commercial n‐type Bi2Te3‐alloys, the cooling device realizes a temperature drop as large as 68 K from 300 K and 24 K from 180 K, demonstrating the extended cooling capability of thermoelectric coolers at cryogenic temperatures. imageKeywords
Funding Information
- National Natural Science Foundation of China (T2125008, 92263108, 92163203, 52102292)
This publication has 63 references indexed in Scilit:
- Gradient Doping Enables an Extraordinary Efficiency in Thermoelectric PbTe 1−x I xAdvanced Materials, 2024
- High‐Efficiency Thermoelectric Module Based on High‐Performance Bi0.42Sb1.58Te3 MaterialsAdvanced Functional Materials, 2023
- High Performance BiSbTe Alloy for Superior Thermoelectric CoolingAdvanced Functional Materials, 2023
- Significant Enhancement of Thermoelectric Figure of Merit in BiSbTe‐Based Composites by Incorporating Carbon MicrofiberAdvanced Functional Materials, 2021
- Ultra‐High Thermoelectric Performance in Bulk BiSbTe/Amorphous Boron Composites with Nano‐Defect ArchitecturesAdvanced Energy Materials, 2020
- Leveraging Deep Levels in Narrow Bandgap Bi0.5Sb1.5Te3 for Record‐High zTave Near Room TemperatureAdvanced Functional Materials, 2020
- The Thermoelectric Properties of Bismuth TellurideAdvanced Electronic Materials, 2019
- Enhancement in thermoelectric power of Ce(Ni1−xCux)2Al3: An implication of two‐band conductionPhysica Status Solidi (b), 2014
- Stabilizing the Optimal Carrier Concentration for High Thermoelectric EfficiencyAdvanced Materials, 2011
- Thermoelectric properties of Bi2Te3-Sb2Te3-Sb2Se3 pseudo-ternary alloys in the temperature range 77 to 300 KJournal of Materials Science, 1966