Graphene-black phosphorus printed photodetectors
Open Access
- 24 March 2023
- journal article
- research article
- Published by IOP Publishing in 2D Materials
- Vol. 10 (3) , 035015
Abstract
Layered materials (LMs) produced by liquid phase exfoliation (LPE) can be used as building blocks for optoelectronic applications. However, when compared with mechanically exfoliated flakes, or films prepared by chemical vapor deposition (CVD), LPE-based printed optoelectronic devices are limited by mobility, defects and trap states. Here, we present a scalable fabrication technique combining CVD with LPE LMs to overcome such limitations. We use black phosphorus inks, inkjet-printed on graphene on Si/SiO2, patterned by inkjet printing based lithography, and source and drain electrodes printed with an Ag ink, to prepare photodetectors (PDs). These have an external responsivity (R ext)∼337 A W−1 at 488 nm, and operate from visible (∼488 nm) to short-wave infrared (∼2.7 µm, R ext ∼ 48 mA W−1). We also use this approach to fabricate flexible PDs on polyester fabric, one of the most common used in textiles, achieving R ext ∼ 6 mA W−1 at 488 nm for an operating voltage of 1 V. Thus, our combination of scalable CVD and LPE techniques via inkjet printing is promising for wearable and flexible applications.Keywords
Funding Information
- eu (Graphene Flagship)
- ISF (1732/18)
- Defence Science and Technology Laboratory (GBBC)
- H2020 European Research Council (Hetero2D)
- Engineering and Physical Sciences Research Council (EP/K01711X/1)
This publication has 166 references indexed in Scilit:
- Inkjet-Printed Graphene ElectronicsACS Nano, 2012
- Graphene photonics and optoelectronicsNature Photonics, 2010
- Preparation and properties of thin parylene layers as the gate dielectrics for organic field effect transistorsMicroelectronics Journal, 2009
- Quasi-transverse electromagnetic modes supported by a graphene parallel-plate waveguideJournal of Applied Physics, 2008
- Charged-impurity scattering in grapheneNature Physics, 2008
- Organic transistors manufactured using inkjet technology with subfemtoliter accuracyProceedings of the National Academy of Sciences, 2008
- A self-consistent theory for graphene transportProceedings of the National Academy of Sciences, 2007
- Demonstration of a 256×256 middle-wavelength infrared focal plane array based on InGaAs/InGaP quantum dot infrared photodetectorsApplied Physics Letters, 2004
- Kinetic studies of polyurethane polymerization with Raman spectroscopyPolymer, 2003
- The Beer-Lambert LawJournal of Chemical Education, 1962