Thermal fatigue modelling for SnAgCu and SnPb solder joints
Authors:
- 1 January 2004
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 557-564
Abstract
Thermal fatigue of solder joints is investigated by means of the finite element method (FEM). During the usual thermal cycle regime with relatively slow temperature ramping rates, solder constitutive response is dominated by secondary creep. In the paper secondary creep laws are given for SnPb and SnAgCu solders, based on our own measurements and literature data. These secondary creep behaviours are compared to other data recently published. Additional primary creep terms are introduced in the creep description. To relate calculation results to fatigue life, criteria of Manson-Coffin type are proposed. These empirical laws are based on either the cyclic inelastic strain or dissipated energy. Effects of the choice of different creep laws on the calculated creep strains and energy densities are studied for two standard components on FR-4 board, a ceramic chip resistor (CC) of size 0805 and a plastic ball grid array with 225 I/O (PBGA 225). It is shown that the choice of the creep law, e.g. the inclusion of primary creep, does significantly affect only the results for the PBGA solder ballsKeywords
This publication has 11 references indexed in Scilit:
- Microstructural dependence of constitutive properties of eutectic SnAg and SnAgCu solders2004
- Viscoplastic constitutive properties and energy-partitioning model of lead-free Sn3.9Ag0.6Cu solder alloy2004
- Acceleration models, constitutive equations, and reliability of lead-free solders and joints2004
- Reliability Prediction of Area Array Solder JointsJournal of Electronic Packaging, 2003
- Fatigue life models for SnAgCu and SnPb solder joints evaluated by experiments and simulation2003
- An efficient approach to predict solder fatigue life and its application to SM- and area array components1997
- Thermomechanical Fatigue of 63Sn-37Pb Solder Joints1993
- Integrated Matrix Creep: Application to Accelerated Testing and Lifetime Prediction1991
- Creep deformation and rupture properties of unirradiated Zircaloy-4 nuclear fuel cladding tube at temperatures of 727 to 857 KJournal of Nuclear Materials, 1990
- Deformation of PbSn eutectic alloys at relatively high strain ratesActa Metallurgica, 1979