A Volume-of-Fluid Heat Pipe Model Resolving Pressure Discontinuities at the Wick-Vapor Interface
Authors:
- Sascha ZimmermannSZSascha Zimmermann
- Maximilian KlippelMKMaximilian Klippel
- Robert DreilingRDRobert Dreiling
- Thinh Nguyen-XuanTNThinh Nguyen-Xuan
- Michael PfitznerMichael Pfitzner
Preprint
- 1 January 2021
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Heat pipes are passive cooling devices which play an increasingly important role in a vast field of cooling solutions for technologies like electric machines or consumer electronics. Simulations that reliably predict the heat pipe’s performance and operational limits are the key for optimizing cooling efficiency. In this paper, a novel Volume-of-Fluid model is presented which resolves temperature and pressure discontinuities at the wick-vapor interface. The flow resistance in the wick structure is modeled using momentum sources based on the Darcy-Forchheimer formulation. Additional momentum sources perpendicular to the phase boundary account for capillary forces and ultimately lead to distinct pressure regimes in the wick and vapor flow. Evaporation and condensation are modeled using a data set which takes wick microstructure effects into account and is based on statistic rate theory. The involved thermophysical fluid properties are obtained from a model by the International Association for the Properties of Water and Steam depending on temperature and pressure. Eventually, the simulation approach is validated against experimental and numerical data from literature. The final model enables thermal engineers to predict dry-out conditions and to optimize the capillary structure and heat pipe geometry. Furthermore, this paper reveals a methodical error in the state-of-the-art simulation approach which leads to a significant underestimation of mass flow and pressure drop.Keywords
This publication has 22 references indexed in Scilit:
- Analysis of flat heat pipes with various heating and cooling configurationsApplied Thermal Engineering, 2011
- A numerical model for transport in flat heat pipes considering wick microstructure effectsInternational Journal of Heat and Mass Transfer, 2011
- A microscale model for thin-film evaporation in capillary wick structuresInternational Journal of Heat and Mass Transfer, 2011
- Characteristics of an evaporating thin film in a microchannelInternational Journal of Heat and Mass Transfer, 2007
- Transport in Flat Heat Pipes at High Heat Fluxes From Multiple Discrete SourcesJournal of Heat Transfer, 2004
- A Simplified Conduction Based Modeling Scheme for Design Sensitivity Study of Thermal Solution Utilizing Heat Pipe and Vapor Chamber TechnologyJournal of Electronic Packaging, 2003
- Effects of oxidation and surface roughness on contact angleExperimental Thermal and Fluid Science, 1994
- Vapor flow analysis of an axially rotating heat pipeInternational Journal of Heat and Mass Transfer, 1993
- Vapor Flow Calculations in a Flat-Plate Heat PipeAIAA Journal, 1979
- Influence of Bed Size on the Flow Characteristics and Porosity of Randomly Packed Beds of SpheresJournal of Applied Mechanics, 1973