Effect of fibre contents toward manufacturing defects and interfacial adhesion of Arenga Pinnata fibre reinforced fibreglass/kevlar hybrid composite in boat construction
Open Access
- 1 June 2021
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1960 (1) , 012022
Abstract
In recent years,Arenga Pinnatafibre has been found with great potential to be used as fibre reinforcement in material matrix composites. This study investigates the effect of fibre contents toward manufacturing defects and interfacial adhesion ofArenga Pinnatafibre reinforced Fiberglass/Kevlar hybrid composite material in boat construction. The composite testing coupons were prepared based on the volume fraction ofArenga Pinnatafibre which are 30%, 45%, 60%, and 75%. The long Arenga Pinnata fibre was placed and arranged into the mould by hand lay-up technique. The testing coupon have been arranged with a thickness of 5mm. Manufacturing defects and interfacial adhesion had determined by Scanning Electron Microscopy (SEM) techniques. The SEM results showed that specimen D (60%) of Arenga Pinnata exhibits the less manufacturing defects with a good interfacial and well bonding between the fibre and matrix among other testing specimens. Meanwhile, specimen E (75%) shows the highest manufacturing defects. As a conclusion, 60% ofArenga Pinnatafibre contents showed less manufacturing defects and exhibited good interfacial adhesion. SEM had significantly determined the manufacturing defects and interfacial adhesion ofArenga Pinnatafibre reinforced Fiberglass/ Kevlar hybrid composite material.Keywords
This publication has 13 references indexed in Scilit:
- Viscoelastic characteristics of carbon fiber-reinforced epoxy filament wound laminatesComposites Communications, 2020
- Comparison of the morphological and mechanical properties of oil Palm EFB fibres and kenaf fibres in nonwoven reinforced compositesIndustrial Crops and Products, 2019
- Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performanceJournal of Composite Materials, 2018
- Almost Forgotten Resources – Biomechanical Properties of Traditionally Used Bast Fibers from Northern AngolaBioResources, 2016
- A review on tribological performance of natural fibre polymeric compositesTribology International, 2015
- The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy compositesComposites Part B: Engineering, 2015
- Progress Report on Natural Fiber Reinforced CompositesMacromolecular Materials and Engineering, 2013
- Detection of Defects in Kenaf/Epoxy using Infrared Thermal Imaging TechniqueProcedia Chemistry, 2012
- Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structuresComposites Part A: Applied Science and Manufacturing, 2008
- Accelerated ageing of a glass fibre-reinforced epoxy resin in waterComposites, 1983