Piezoresistive damage sensing and mechanical characteristics of carbon/glass hybrid thermoplastic composites
- 30 March 2023
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 57 (11) , 1909-1926
Abstract
A comprehensive experimental investigation is performed to understand the damage sensing capabilities of thermoplastic intra-ply carbon/glass laminated composites embedded with Carbon Nanotubes (CNTs) under quasi-static interlaminar shear and mode-I fracture loading conditions. CNTs are dispersed in thermoplastic Elium® resin using a combination of ultrasonication and shear mixing processes. This resin mix is used in a vacuum infusion process to fabricate four different intra-ply laminated composites orientations; G-0-C-90 [Carbon fibers are in the longitudinal direction], G-90-C-0 [Glass fibers are in the longitudinal direction], G-45-C-45(R) [carbon and glass fibers are at +45°, and −45° from the longitudinal direction and form a repeating layup], and G-45-C-45(A) [carbon and glass fibers are at +45°, and −45°, but with alternating directions for each lamina in the layup]. Four-circumferential probes are utilized to obtain the piezo-resistance measurements associated with damage inside the composites under shear and mode-I loadings. In the shear experimentation, the G-45-C-45(A) orientation demonstrated the largest interlaminar shear strength, at 50% greater than the G-45-C-45(R) orientation. Both G-45-C-45(A) and G-45-C-45(R) had significantly larger shear strains compared to the G-90-C-0 and G-0-C-90 orientations. However, the best resolution in shear damage sensing was seen with the G-0-C-90 composites. In the mode-I fracture experiments, the greatest fracture initiation toughness is shown with the G-0-C-90 orientation, which is 80% greater than the G-90-C-0 orientation. Compared to all orientations, the G-0-C-90 orientation also provided the most sensitive electrical response.Keywords
Funding Information
- Office of Naval Research (N00014-20-1-2170)
- National Science Foundation, USA (NSF-MRI-1726239)
This publication has 17 references indexed in Scilit:
- A critical review of piezoresistivity and its application in electrical-resistance-based strain sensingJournal of Materials Science, 2020
- Damage sensing in multi-functional glass fiber composites under mode-I fracture loadingJournal of Composite Materials, 2020
- Analysis of fracture toughness in mode II and fractographic study of composites based on Elium® 150 thermoplastic matrixComposites Part B: Engineering, 2019
- Recycling glass fiber thermoplastic composites from wind turbine bladesJournal of Cleaner Production, 2019
- Composites from renewable and sustainable resources: Challenges and innovationsScience, 2018
- Damage sensing in multi-functional hybrid natural fiber composites under shear loadingSmart Materials and Structures, 2018
- Mode I fracture toughness and fractographic investigation of carbon fibre composites with liquid Methylmethacrylate thermoplastic matrixComposites Part B: Engineering, 2018
- Damage detection of carbon fiber reinforced polymer composites via electrical resistance measurementComposites Part B: Engineering, 2011
- Self-sensing of flexural strain and damage in carbon fiber polymer-matrix composite by electrical resistance measurementCarbon, 2006
- The use of doubler reinforcement in delamination toughness testingComposites Part A: Applied Science and Manufacturing, 2004