Comparison Study on Welding Temperature and Joint Characteristics of AZ31 Magnesium Alloy by Ultrasonic and Heat Pipe Assisted FSW
Open Access
Abstract
As an important factor in friction stir welding (FSW) process, temperature directly affects the microstructures and mechanical properties of welded joints. The present work aims to investigate the welding temperature and joint characteristics of AZ31 magnesium alloy under three FSW conditions: conventional friction stir welding (FSW), ultrasonic assisted friction stir welding (UaFSW), and ultrasonic and heat pipe assisted friction stir welding (UHaFSW), respectively. The results show that the welding temperature distributions and the characteristic of “non-uniformity” are presented in the FSW and UaFSW joints along the welding and horizontal directions. Compared with conventional FSW, UaFSW can effectively balance and improve the non-uniform temperature distribution in the joints, resulting in the significant decreases in the peak temperatures and durations of high temperature. Hence, the grains are refined in the microstructure of the nugget zone in the UHaFSW joints, which enhances their microhardness and tensile properties. Based on these results, it can be concluded that UHaFSW could be an effective method to improve the mechanical properties of AZ31 magnesium alloy welded joints.Keywords
Funding Information
- National Natural Science Foundation of China (51375218 and 51675248)
This publication has 49 references indexed in Scilit:
- Effects of pin angle and preheating on temperature distribution during friction stir welding operationTransactions of Nonferrous Metals Society of China, 2013
- Friction Stir Welded AZ31 Magnesium Alloy: Microstructure, Texture, and Tensile PropertiesMetallurgical and Materials Transactions A, 2012
- Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir weldsMaterials Science and Engineering: A, 2012
- Thermal Cycle Characteristics of AM 50 Magnesium Alloy Welded by FSWKey Engineering Materials, 2009
- Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parametersActa Materialia, 2009
- Recent advances in friction-stir welding – Process, weldment structure and propertiesProgress in Materials Science, 2008
- Integration of Heat Pipe into Fuel Cell TechnologyHeat Transfer Engineering, 2008
- Recrystallization and grain growth of deformed magnesium alloyPhilosophical Magazine, 2008
- Modeling strain hardening and texture evolution in friction stir welding of stainless steelMaterials Science and Engineering: A, 2005
- Research, development and industrial application of heat pipe technology in ChinaApplied Thermal Engineering, 2003