Microfabricated Waveguide Terminations for Wideband and Low-Power THz Applications
- 13 December 2024
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (2) , 181-190
Abstract
This paper presents the design, simulation, microfabrication, and characterization of broadband waveguide terminations intended as drop-in components in waveguide blocks. Two types of terminations were developed, fabricated and characterized. The first type employs a quartz-based E-probe to couple to a waveguide, integrating an on-substrate titanium nitride (Ti-N) alloy resistive absorber with broadband tuning circuitry. This design achieves a return loss of better than 20 dB over the 260-375 GHz frequency range. The second type features a finline to slotline transition, constructed from a 30 μm thick Si membrane covered with high resistivity Ti-N alloy. This load demonstrates a return loss of better than 20 dB across the 210-380 GHz band. In order to ensure the required performance of the loads at cryogenic temperatures, the sheet resistance of the employed Ti-N resistive film was characterized from room temperature to 4K employing a closed-cycle cryostat and a 4-probe measurement system. For comparative purposes, the room temperature performance of terminations employing a traditional Eccosorb TM material was measured and compared with the proposed waveguide terminations. Furthermore, the sideband rejection ratio SBRR of a 2SB SIS mixer was evaluated at cryogenic temperatures using the proposed finline-based terminations for LO directional couplers and 90° RF hybrids in comparison with the Eccosorb TM made terminations. The measurements showed that the performance of the proposed terminations outperforms those achieved with Eccosorb™ absorbers at room temperature and is comparable at cryogenic temperatures.Keywords
This publication has 19 references indexed in Scilit:
- SEPIA345: A 345 GHz dual polarization heterodyne receiver channel for SEPIA at the APEX telescopeAstronomy & Astrophysics, 2022
- A 230-GHz Endfire SIS Mixer With Near Quantum-Limited PerformanceIEEE Microwave and Wireless Components Letters, 2022
- Comprehensive Description of Sideband Ratio of 2SB SIS Receiver2019
- A Slotline DC Block for Microwave, Millimeter, and Submillimeter CircuitsIEEE Microwave and Wireless Components Letters, 2019
- ALMA Band 5 receiver cartridgeAstronomy & Astrophysics, 2018
- 110-170 GHz Millimetre Wave Power Standard2006
- A Full-Height Waveguide to Thin-Film Microstrip Transition with Exceptional RF Bandwidth and Coupling EfficiencyInternational Journal of Infrared and Millimeter Waves, 2003
- Accurate Modelling of Thin-Film Resistor up to 40 GHz2002
- Parasitic capacitance effects of planar resistorsIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1989
- Accurate Models for Microstrip Computer-Aided Design1980