The Effects of Hot Blocks Geometry and Particle Migration on Heat Transfer and Entropy Generation of a Novel I-Shaped Porous Enclosure
Open Access
- 26 June 2021
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 13 (13) , 7190
Abstract
This paper studied the cooling performance of a hot electronic chip using nanofluids (NF) mixed convection, implementing Buongiorno’s model of the NF simulation. The NF were assumed water-Al2O3 nanoparticles (NP) in the range of 0 to 4% of volume concentration. Six different problems of the combinations of three internal hot blocks, including triangular, square, and circular geometries, and two porous media, including sand and compact metallic powder, were numerically solved. To discretize the governing equations, a finite control volume method was applied. As most of the proposed correlations for the thermophysical properties of the NF were inaccurate, especially for thermal conductivity, a new predictive correlation was proposed using the multi-variable regression method with acceptable accuracy. It was found that the cooling performance improved with any increase in the NP loading. A higher nanoparticle concentration yielded better cooling characteristics, which was 11.93% for 4% volume. The sand porous medium also yielded a much higher value of the normalized Nusselt number (Nu) compared to the other medium. The entropy generation (EG) enhancement was maximum for the triangular hot block in a sand porous cavity.Keywords
This publication has 47 references indexed in Scilit:
- Combustion of nanofluid fuels with the addition of boron and iron particles at dilute and dense concentrationsCombustion and Flame, 2012
- Experimental characterization of micro-drilling process using nanofluid minimum quantity lubricationInternational Journal of Machine Tools and Manufacture, 2011
- Nanofluids: Stability, phase diagram, rheology and applicationsParticuology, 2010
- Boundary-layer flow of a nanofluid past a stretching sheetInternational Journal of Heat and Mass Transfer, 2010
- A high efficiency cavity ion source using TIMS for nuclear forensic analysisJournal of Alloys and Compounds, 2007
- Heat transfer augmentation in a two-sided lid-driven differentially heated square cavity utilizing nanofluidsInternational Journal of Heat and Mass Transfer, 2007
- Experimental study of heat transfer by natural convection in a closed cavity: application in a domestic refrigeratorJournal of Food Engineering, 2005
- Natural convective heat transfer in a fluid saturated variable porosity mediumInternational Journal of Heat and Mass Transfer, 1997
- Natural convection of air in a square cavity: A bench mark numerical solutionInternational Journal for Numerical Methods in Fluids, 1983
- Unsteady natural convection in a rectangular cavityJournal of Fluid Mechanics, 1980