Optimizing Polymer Solar Cells Using Non-Halogenated Solvent Blends
Open Access
Abstract
More environmentally friendly polymer solar cells were constructed using a conjugated polymer, poly (2,5-thiophene-alt-4,9-bis(2-hexyldecyl)-4,9-dihydrodithieno[3,2-c:3′,2′h][1,5] naphthyridine-5,10-dione, PTNT, as a donor material in combination with PC71BM as an acceptor in a bulk heterojunction device structure. A non-halogenated processing solvent (o-xylene) and solvent additives that are less harmful to the environment such as 1-methoxynaphthalene (MN) and 1-phenylnaphthalene (PN) were used throughout the study as processing solvents. The most widely used halogenated solvent additives (1,8-diiodooctane (DIO) and 1-chloronaphthalene (CN)) were also used for comparison and to understand the effect of the type of solvent additives on the photovoltaic performances. Atomic force microscopy (AFM) was employed to investigate the surface morphology of the films prepared in the presence of the various additives. The best-performing polymer solar cells provided a high open-circuit voltage of 0.9 V, an efficient fill factor of around 70%, and a highest power conversion efficiency (PCE) of over 6% with the use of the eco-friendlier o-xylene/MN solvent systems. Interestingly, the solvent blend which is less harmful and with low environmental impact gave a 20% rise in PCE as compared to an earlier reported device efficiency that was processed from the chlorinated solvent o-dichlorobenzene (o-DCB).Keywords
Funding Information
- Australian Research Council (Project DP170102467)
This publication has 36 references indexed in Scilit:
- The Influence of Solvent Additive on Polymer Solar Cells Employing Fullerene and Non‐Fullerene AcceptorsAdvanced Electronic Materials, 2017
- Morphology changes upon scaling a high-efficiency, solution-processed solar cellEnergy & Environmental Science, 2016
- Printed Nanostructures for Organic Photovoltaic Cells and Solution‐Processed Polymer Light‐Emitting DiodesEnergy Technology, 2015
- A New Tetracyclic Lactam Building Block for Thick, Broad-Bandgap PhotovoltaicsJournal of the American Chemical Society, 2014
- Solution-Processed Small Molecule Donor/Acceptor Blends for Electrical Memory Devices with Fine-Tunable Storage PerformanceThe Journal of Physical Chemistry C, 2014
- Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaicsProgress in Polymer Science, 2013
- Additives for morphology control in high-efficiency organic solar cellsMaterials Today, 2013
- Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cellsEnergy & Environmental Science, 2013
- Solution-Processed Organic Solar Cells with Power Conversion Efficiencies of 2.5% using Benzothiadiazole/Imide-Based AcceptorsChemistry of Materials, 2011
- Organic solar cells: An overviewJournal of Materials Research, 2004