High‐Voltage Stability of Small‐Size Single Crystal Ni‐Rich Layered Cathode for Sulfide‐Based All‐Solid‐State Lithium Battery at 4.5 V
Authors:
- 17 May 2023
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 13 (26)
Abstract
Mechanical damage of NCM811 (LiNi0.8Co0.1Mn0.1O2), severe interfacial side reactions, and physical contact failure of cathode and solid electrolyte (SE) are the main obstacles for it to achieve high‐voltage stability in all‐solid‐state batteries (ASSLBs). The cathode morphology effects on the structural integrity are directly related to the electrochemical performance of ASSLBs. In this work, small‐size single crystal NCM811 (S‐SC) is synthesized for sulfide‐based ASSLBs to solve mechanical damage and contact failure issues. In addition, the interfacial stability is improved by a Li2O pre‐lithiation strategy. Cross section polisher‐scanning electron microscopy (CP‐SEM) is applied to reveal the mechanical structure evolution behavior of NCM811 cathodes with different morphology. Electrochemical impedance spectroscopy (EIS), time of flight secondary ion mass spectrometry (TOF‐SIMS), and X‐ray photoelectron spectroscopy (XPS) technologies are applied to characterize the interfacial stability among cycling. As a result, with a high mass loading of 35.67 mg cm−2 and high current density of 7.13 mA cm−2, the Li2O pre‐lithiated S‐SC (S‐SC‐PL) cathode delivers extraordinarily high‐voltage stability of 100% after 500 cycles at 2.72–4.4 V and 100% after 200 cycles at 2.72–4.5 V in ASSLBs. This work provides an effective cathode morphological design strategy to improve high‐voltage stability of Ni‐rich layered cathodes for sulfide‐based ASSLBs.Keywords
Funding Information
- National Key Research and Development Program of China (2018YFE0111600)
- National Natural Science Foundation of China (52172224, 22279090)
This publication has 49 references indexed in Scilit:
- Capacity Fading of Ni-Rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?Chemistry of Materials, 2018
- Running out of lithium? A route to differentiate between capacity losses and active lithium losses in lithium-ion batteriesPhysical Chemistry Chemical Physics, 2017
- Capacity Fade in Solid-State Batteries: Interphase Formation and Chemomechanical Processes in Nickel-Rich Layered Oxide Cathodes and Lithium Thiophosphate Solid ElectrolytesChemistry of Materials, 2017
- Reviving the lithium metal anode for high-energy batteriesNature Nanotechnology, 2017
- Stabilized Li3N for efficient battery cathode prelithiationEnergy Storage Materials, 2017
- A solid future for battery developmentNature Energy, 2016
- Solid Electrolyte Interphase Growth and Capacity Loss in Silicon ElectrodesJournal of the American Chemical Society, 2016
- High-power all-solid-state batteries using sulfide superionic conductorsNature Energy, 2016
- Interface Stability in Solid-State BatteriesChemistry of Materials, 2015
- Li6PS5X: A Class of Crystalline Li‐Rich Solids With an Unusually High Li+ MobilityAngewandte Chemie International Edition, 2008