Numerical Investigation of Hydraulic Fracture Propagation in Naturally Fractured Reservoirs Based on Lattice Spring Model
Authors:
Open Access
Abstract
Hydraulic fracturing has been extensively employed for permeability enhancement in low-permeability reservoirs. The geometry of the hydraulic fracture network (HFN) may have implications for the optimization of hydraulic fracturing operations. Various parameters, including the in situ stress, treatment parameters (injection rate and fluid viscosity), and orientation of natural fractures (NFs), can significantly affect the interactions between hydraulic fracture (HF) and NFs and the final HFN. In this study, a lattice-spring code was employed to determine the impact of various parameters on the geometry of the HFN. The modelling results indicated that with a large stress difference, the global orientation of the fracture propagation was restricted to the direction of maximum principal stress, and the number of fracture branches was reduced. The geometry of the HFN changed from circular to elliptical. In contrast, with an increase in the fluid viscosity/injection rate, the evolution of the geometry of the HFN exhibited the opposite trend. The global orientation of HF propagation tended to remain parallel to the direction of maximum principal stress, regardless of the branching and tortuosity of the fracture. The variations in the ratio of tensile fracture (HF) to shear fracture (shear slip on NF) can be significant, depending on the stress state, treatment parameters, and preexisting NF network, which determine the dominant stimulation mechanism. This study provides insight into the HF propagation in naturally fractured reservoirs.Keywords
Funding Information
- Tiandi Science and Technology Co., Ltd. Science and Technology Innovation Venture Capital Special Project (KJ-2018-TDKCZL-05, 2019-TD-ZD008, 51704160)
- National Natural Science Foundation of China (KJ-2018-TDKCZL-05, 2019-TD-ZD008, 51704160)
This publication has 47 references indexed in Scilit:
- Geomechanical aspects of shale gas development2013
- Fracture network engineering for hydraulic fracturingThe Leading Edge, 2011
- Experimental investigation of hydraulic fracturing in random naturally fractured blocksInternational Journal of Rock Mechanics and Mining Sciences, 2010
- Dynamic fracture propagation in hydraulic re-fracturingJournal of Petroleum Science and Engineering, 2010
- What Is Stimulated Reservoir Volume?SPE Production & Operations, 2010
- An Integrated Numerical Modelling–Discrete Fracture Network Approach Applied to the Characterisation of Rock Mass Strength of Naturally Fractured PillarsRock Mechanics and Rock Engineering, 2009
- Analysis of fracture propagation behavior and fracture geometry using a tri-axial fracturing system in naturally fractured reservoirsInternational Journal of Rock Mechanics and Mining Sciences, 2008
- An extended finite element method for hydraulic fracture problemsCommunications in Numerical Methods in Engineering, 2008
- Deflection and propagation of fluid-driven fractures at frictional bedding interfaces: A numerical investigationJournal of Structural Geology, 2007
- Integrating Fracture Mapping Technologies To Improve Stimulations in the Barnett ShaleSPE Production & Facilities, 2005