Effect of alloyed Cr on corrosion behavior of low‐alloy steel in wet atmosphere
- 9 February 2022
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 73 (6) , 918-931
Abstract
The effect of 1.5% Cr on the corrosion resistance of low‐alloy steel in a simulated mine environment was studied. To clarify the effect of Cr on the corrosion of low‐alloy steel in the wet environment at the initial stage of corrosion, salt spray corrosion tests were performed to simulate the corrosion process in the field, and the bare steel and corrosion products were characterized. The results showed that the addition of 1.5% Cr reduced the surface potential and the kinetic tendency of the corrosion reaction, making the corrosion rate at the initial stage of the test lower than anticipated. An increase in Cr content significantly elevates the level of α‐FeOOH. The corrosion product film (CPF) had a bilayer structure, with α‐FeOOH of Cr‐rich and Cr(OH)3 were found in the inner layer and at the junction of the inner and outer layer. The CPF had a dense structure that effectively reduced electrochemical reaction activity and improved corrosion resistance.Keywords
This publication has 39 references indexed in Scilit:
- Atmospheric corrosion of Ni-advanced weathering steels in marine atmospheres of moderate salinityCorrosion Science, 2013
- Study of the corrosion behavior of weathering steels in atmospheric environmentsCorrosion Science, 2013
- Effects of rare earth on inclusions and corrosion resistance of 10PCuRE weathering steelJournal of Rare Earths, 2010
- Evaluation of Applicability for Ni-advanced Weathering Steels and Bridge High-performance Steels to Railway Steel BridgesQuarterly Report of RTRI, 2010
- Depletion effects at phase boundaries in 2205 duplex stainless steel characterized with SKPFM and TEM/EDSCorrosion Science, 2009
- Weatherability of 09CuPCrNi steel in a tropical marine environmentCorrosion Science, 2009
- Taxonomy for protective ability of rust layer using its composition formed on weathering steel bridgeCorrosion Science, 2007
- Electronic work-function calculations of polycrystalline metal surfaces revisitedPhysical Review B, 2001
- Work functions of elements expressed in terms of the Fermi energy and the density of free electronsJournal of Physics: Condensed Matter, 1998
- The long term growth of the protective rust layer formed on weathering steel by atmospheric corrosion during a quarter of a centuryCorrosion Science, 1994