On the Feasibility of Adapting the LiVec Tactile Sensing Principle to Non-Planar Surfaces: A Thin, Flexible Tactile Sensor
Open Access
Abstract
Tactile sensation across the whole hand, including the fingers and palm, is essential for manipulation and, therefore, is expected to be similarly useful for enabling dexterous robot manipulation. Tactile sensation would ideally be distributed (over large surface areas), have a high precision, and provide measurements in multiple axes, allowing for effective manipulation and interaction with objects of varying shapes, textures, friction, and compliance. Given the complex geometries and articulation of state-of-the-art robotic grippers and hands, they would benefit greatly from their surface being instrumented with a thin, curved, and/or flexible tactile sensor technology. However, the majority of current sensor technologies measure tactile information across a planar sensing surface or instrument-curved skin using relatively bulky camera-based approaches; proportionally in the literature, thin and flexible tactile sensor arrays are an under-explored topic. This paper, presents a thin, flexible, non-camera-based optical tactile sensor design as an investigation into the feasibility of adapting our novel LiVec sensing principle to curved and flexible surfaces. To implement the flexible sensor, flexible PCB technology is utilized in combination with other soft components. This proof-of-concept design eliminates rigid circuit boards, creating a sensor capable of providing localized 3D force and 3D displacement measurements across an array of sensing units in a small-thickness, non-camera-based optical tactile sensor skin covering a curved surface. The sensor consists of 16 sensing units arranged in a uniform 4 × 4 grid with an overall size of 30 mm × 30 mm × 7.2 mm in length, width, and depth, respectively. The sensor successfully estimated local XYZ forces and displacements in a curved configuration across all sixteen sensing units, the average force bias values () were −1.04 mN, −0.32 mN, and −1.31 mN, and the average precision () was 54.49 mN, 55.16 mN and 97.15 mN, for the X, Y, Z axes, respectively, the average displacement bias values () were 1.58 μm, 0.29 μm, and −1.99 μm, and the average precision values () were 221.61 μm, 247.74 μm, and 44.93 μm for the X, Y, and Z axes, respectively. This work provides crucial insights into the design and calibration of future curved LiVec sensors for robotic fingers and palms, making it highly suitable for enhancing dexterous robotic manipulation in complex, real-world environments.
Keywords
Funding Information
- Taighde Éireann—Research Ireland President of Ireland Future Research Leaders Award (17/FRL/4832)
This publication has 49 references indexed in Scilit:
- Biomimetic Contact Behavior Inspired Tactile Sensing Array with Programmable Microdomes Pattern by Scalable and Consistent FabricationAdvanced Science, 2024
- Non-equilibrium compression achieving high sensitivity and linearity for iontronic pressure sensorsScience Bulletin, 2024
- A Highly Sensitive Multimodal Tactile Sensing Module with Planar Structure for Dexterous Manipulation of RobotsAdvanced Intelligent Systems, 2023
- Development of flexible tactile sensor for the envelop of curved robotic hand finger in grasping force sensingMeasurement, 2021
- Soft Tactile Sensing Skins for RoboticsCurrent Robotics Reports, 2021
- Finger‐Skin‐Inspired Flexible Optical Sensor for Force Sensing and Slip Detection in Robotic GraspingAdvanced Materials Technologies, 2021
- Recent Progress in Flexible Tactile Sensors for Human‐Interactive Systems: From Sensors to Advanced ApplicationsAdvanced Materials, 2021
- Recent progresses on flexible tactile sensorsMaterials Today Physics, 2017
- Tactile sensing in dexterous robot hands — ReviewRobotics and Autonomous Systems, 2015
- Flexible and stretchable fabric-based tactile sensorRobotics and Autonomous Systems, 2015