Evaluation of a magnetic gear for air‐cooled condenser applications
Open Access
- 9 April 2018
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 12 (5) , 677-683
Abstract
In high‐power industrial applications such as air‐cooled condenser fans, excessive mechanical gear failures highlight a need to investigate possible alternatives. In this study, the concentric magnetic gear (CMG) is evaluated as a potential replacement for traditional mechanical gear. For a more objective comparison between the CMG and mechanical gear, a CMG is optimally designed in accordance with the performance specifications of an existing mechanical gear. The design is further refined for performance improvements taking into account mechanical strength requirements. Based on the design a CMG prototype is manufactured and experimentally evaluated against its mechanical counterpart under the same operating conditions. The performance of both gears achieved efficiency in the mid 90% range. The mechanical gear slightly outperformed the CMG under rated operating conditions. The large unbalanced magnetic forces within the CMG are likely responsible for the larger than expected no‐load losses. With the advantage of overload protection, reduced maintenance requirements, the CMG could be a valid replacement for the mechanical gear.Keywords
This publication has 20 references indexed in Scilit:
- Design and Evaluation of a Magnetically Geared PM MachineIEEE Transactions on Magnetics, 2015
- Failure analysis of air cooled condenser gearboxCase Studies in Engineering Failure Analysis, 2014
- Performance improvement of magnetic gear and efficiency comparison with conventional mechanical gearJournal of Applied Physics, 2014
- Construction of a low speed flux focusing magnetic gear2013
- Analysis of the Concentric Planetary Magnetic Gear With Strengthened Stator and Interior Permanent Magnet Inner RotorIEEE Transactions on Industry Applications, 2011
- Comparative Study Between Mechanical and Magnetic Planetary GearsIEEE Transactions on Magnetics, 2010
- Development of a High-Performance Magnetic GearIEEE Transactions on Industry Applications, 2005
- Design, analysis and realisation of a high-performance magnetic gearIEE Proceedings - Electric Power Applications, 2004
- A novel high-performance magnetic gearIEEE Transactions on Magnetics, 2001
- Analysis of torsional torques in starting of large squirrel cage induction motorsIEEE Transactions on Energy Conversion, 1994