Is it possible to generate accurate 3D point clouds with UAS-LIDAR and UAS-RGB photogrammetry without GCPs? A case study on a beach and rocky cliff
Open Access
- 6 November 2024
- journal article
- research article
- Published by Springer Nature in Landscape Ecology
- Vol. 39 (11) , 1-24
Abstract
Context: Recently, Unoccupied Aerial Systems (UAS) with photographic or Light Detection and Ranging (LIDAR) sensors have incorporated on-board survey-grade Global Navigation Satellite Systems that allow the direct georeferencing of the resulting datasets without Ground Control Points either in Real-Time (RTK) or Post-Processing Kinematic (PPK) modes. These approaches can be useful in hard-to-reach or hazardous areas. However, the resulting 3D models have not been widely tested, as previous studies tend to evaluate only a few points and conclude that systematic errors can be found. Objectives: We test the absolute positional accuracy of point clouds produced using UAS with direct-georeferencing systems. Methods: We test the accuracy and characteristics of point clouds produced using a UAS-LIDAR (with PPK) and a UAS-RGB (Structure-from-Motion or SfM photogrammetry with RTK and PPK) in a challenging environment: a coastline with a composite beach and cliff. The resulting models of each processing were tested using as a benchmark a point cloud surveyed simultaneously by a Terrestrial Laser Scanner. Results: The UAS-LIDAR produced the most accurate point cloud, with homogeneous cover and no noise. The systematic bias previously observed in the UAS-RGB RTK approaches are minimized using oblique images. The accuracy observed across the different surveyed landforms varied significantly. Conclusions: The UAS-LIDAR and UAS-RGB with PPK produced unbiased point clouds, being the latter the most cost-effective method. For the other direct georeferencing systems/approaches, the acquisition of GCP or the co-registration of the resulting point cloud is still necessary.Keywords
Funding Information
- Junta de Extremadura (GR21154, GR21156, GR21156, GR21154)
- Ministerio de Economía y Competitividad (UNEX13-1E-1549, UNEX13-1E-1549, UNEX13-1E-1549, UNEX13-1E-1549)
- Agencia Estatal de Investigación (EQC2018-004169-P, EQC2018-004169-P, EQC2018-004169-P, EQC2018-004169-P)
- Ministerio de Ciencia e Innovación (PID2022-137004OB-I00, PID2022-137004OB-I00, PID2022-137004OB-I00, PID2022-137004OB-I00)
- Universidad de Extremadura
This publication has 57 references indexed in Scilit:
- Structure from motion photogrammetric technique2020
- Review of Earth science research using terrestrial laser scanningEarth-Science Reviews, 2017
- 3‐D uncertainty‐based topographic change detection with structure‐from‐motion photogrammetry: precision maps for ground control and directly georeferenced surveysEarth Surface Processes and Landforms, 2017
- Cost‐effective non‐metric photogrammetry from consumer‐grade sUAS: implications for direct georeferencing of structure from motion photogrammetryEarth Surface Processes and Landforms, 2016
- UAS‐based remote sensing of fluvial change following an extreme flood eventEarth Surface Processes and Landforms, 2015
- Using 3D photo-reconstruction methods to estimate gully headcut erosionCATENA, 2014
- High-resolution topography for understanding Earth surface processes: Opportunities and challengesGeomorphology, 2014
- Mitigating systematic error in topographic models derived from UAV and ground‐based image networksEarth Surface Processes and Landforms, 2014
- ‘Structure-from-Motion’ photogrammetry: A low-cost, effective tool for geoscience applicationsGeomorphology, 2012
- Erosion risk assessment of active coastal cliffs in temperate environmentsGeomorphology, 2009