An Integrated Gas Turbine-Kalina Cycle for Cogeneration
Authors:
Open Access
- 3 June 1991
- conference paper
- Published by ASME International
Abstract
A number of studies have shown that the Kalina cycle, using an ammonia-water mixture, can reach higher efficiencies than the normal steam Rankine cycle. In this paper, the Kalina cycle, with a gas turbine topping cycle is applied to cogeneration for district heating. Since the district heating temperatures vary with the heat demand over the year, this application may prove to be especially suitable for the Kalina cycle with its many degrees of freedom in the condensation system. A theoretical comparison between different bottoming cycles producing heat for a typical Scandinavian district heating network has been carried out. The Kalina cycle, the Rankine cycle with a mixture of ammonia and water as the working fluid and the normal single pressure steam Rankine cycle are compared. It is shown that a simple Rankine cycle with an ammonia-water mixture as the working fluid produces more heat and power than the steam Rankine cycle. The best results, however, are obtained for the Kalina cycle, which generates considerably higher heat and power output than the steam Rankine cycle.Keywords
This publication has 4 references indexed in Scilit:
- A preliminary study of the kalina power cycle in connection with a combined cycle systemInternational Journal of Energy Research, 1990
- A Thermodynamic Analysis of the Kalina Cycles: Comparisons, Problems and Perspectives1989
- Applying Kalina Technology to a Bottoming Cycle for Utility Combined Cycles1987
- Combined-Cycle System With Novel Bottoming CycleJournal of Engineering for Gas Turbines and Power, 1984