Comparison of mechanical properties of different 3D printing technologies
Top Cited Papers
Open Access
- 30 May 2025
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-8
Abstract
This study evaluated and compared the mechanical properties of provisional 3D-printed polymers fabricated using three commonly used 3D printing technologies: stereolithography (SLA), digital light processing (DLP), and liquid crystal display (LCD). Ninety specimens, both bar-shaped and disc-shaped, were printed using standardized resin color and print settings for each technology. Flexural strength was measured using a universal testing machine, while surface hardness and roughness were evaluated using a micro-Vickers hardness tester and atomic force microscopy, respectively. Statistical analyses were performed using one-way ANOVA and Tukey’s post-hoc tests at a significance level of p < 0.05. SLA demonstrated the highest flexural strength (93.39 ± 5.57 MPa), significantly higher than DLP (69.97 ± 8.48 MPa) and LCD (64.69 ± 8.98 MPa). Surface hardness was comparable across SLA (18.80 ± 0.57 kgf/mm2), DLP (17.80 ± 1.85 kgf/mm2), and LCD (18.27 ± 0.93 kgf/mm2). In terms of surface roughness, SLA showed the lowest mean value (14.79 ± 7.96 nm), followed by DLP (24.59 ± 9.76 nm), and LCD exhibited the highest roughness (89.87 ± 28.26 nm). The findings indicate that SLA produces polymers with superior flexural strength and the smoothest surface finish, making it preferable for applications requiring strong, high-quality surfaces, while DLP and LCD provide alternative benefits in specific use cases.Keywords
This publication has 33 references indexed in Scilit:
- Dimensional accuracy and surface characteristics of complete-arch cast manufactured by six 3D printersHeliyon, 2024
- Size effects of voids on the mechanical properties of 3D printed partsThe International Journal of Advanced Manufacturing Technology, 2024
- Wear resistance and flexural properties of low force SLA- and DLP-printed splint materials in different printing orientations: An in vitro studyJournal of the Mechanical Behavior of Biomedical Materials, 2024
- Effect of Printing Parameters on the Surface Roughness and Dimensional Accuracy of Digital Light Processing Fabricated PartsJournal of Materials Engineering and Performance, 2023
- Surface roughness of as-printed polymers: a comprehensive reviewThe International Journal of Advanced Manufacturing Technology, 2023
- Assessing the physical and mechanical properties of 3D printed acrylic material for denture base applicationDental Materials, 2022
- Evaluation of trueness and precision of stereolithography-fabricated photopolymer-resin dentures under different postpolymerization conditions: An in vitro studyThe Journal of Prosthetic Dentistry, 2022
- 3D printable biomaterials for dental restoration: A systematic reviewMaterials Today: Proceedings, 2022
- Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientationsThe Journal of Prosthetic Dentistry, 2020
- Laser-based additively manufactured polymers: a review on processes and mechanical modelsJournal of Materials Science, 2020