The Tournemire industrial analogue: reactive-transport modelling of a cement–clay interface
Authors:
- C. WatsonCWC. Watson
- D. SavageDSD. Savage
- J. WilsonJWJ. Wilson
- S. BenbowSBS. Benbow
- C. WalkerCWC. Walker
- S. NorrisSNS. Norris
Open Access
- 1 May 2013
- journal article
- Published by Mineralogical Society in Clay Minerals
- Vol. 48 (2) , 167-184
Abstract
In the post-closure period of a geological disposal facility for radioactive waste, leaching of cement components is likely to give rise to an alkaline plume which will be in chemical disequilibrium with the host rock (which is clay in some concepts) and other engineered barrier system materials used in the facility, such as bentonite. An industrial analogue for cement-clay interaction can be found at Tournemire, southern France, where boreholes filled with concrete and cement remained in contact with the natural mudstone for 15–20 years. The boreholes have been overcored, extracted and mineralogical characterization has been performed. In this study, a reactive-transport model of the Tournemire system has been set up using the general-purpose modelling tool QPAC. Previous modelling work has been built upon by using the most up-to-date data and modelling techniques, and by adding both ion exchange and surface complexation processes in the mudstone. The main features observed at Tournemire were replicated by the model, including porosity variations and precipitation of carbonates, K-feldspar, ettringite and calcite. It was found that ion exchange needed to be included in order for C-S-H minerals to precipitate in the mudstone, providing a better match with the mineralogical characterization. The additional inclusion of surface complexation, however, led to limited calcite growth at the concrete-mudstone interface unlike samples taken from the Tournemire site that have a visible line of crusty carbonates along the interface.Keywords
This publication has 18 references indexed in Scilit:
- The long-term cement studies project: the UK contribution to model development and testingMineralogical Magazine, 2012
- Modelling iron-bentonite interactionsApplied Clay Science, 2010
- Influence of reaction kinetics and mesh refinement on the numerical modelling of concrete/clay interactionsJournal of Hydrology, 2009
- Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cementCement and Concrete Research, 2008
- Mineralogical characterization of the Tournemire argillite after in situ interaction with concretesWaste Management, 2006
- Cement/clay interactions – A review: Experiments, natural analogues, and modelingWaste Management, 2006
- Porewater chemistry in compacted re-saturated MX-80 bentoniteJournal of Contaminant Hydrology, 2003
- Application of the Surface Complexation Concept to Complex Mineral AssemblagesEnvironmental Science & Technology, 1998
- Dissolution kinetics: The nature of the particle attack of layered silicates in HFChemical Engineering Science, 1981
- Adsorption Studies on Clay Minerals. II. A Formulation of the Thermodynamics of Exchange AdsorptionThe Journal of Chemical Physics, 1953