Mullite/SiAlON/Alumina Composites by Infiltration Processing
Authors:
- 1 January 1997
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 80 (1) , 117-124
Abstract
The formation of mullite/SiAlON/alumina composites was studied by infiltrating a SiAlON/alumina‐base composite with two different solutions, followed by thermal treatment. The base composite was prepared from a mixture of tabular Al 2 O 3 grains, fume SiO 2 , and aluminum powders. The mixture was pressed into test bars and nitrided in a nitrogen‐gas (N 2 ) atmosphere at 1480°C. The infiltrants were prehydrolyzed ethyl polysilicate solution and ethyl polysilicatealuminum nitrate solution. The composites were infiltrated under vacuum, cured at 100°C, and precalcined in air at 700°C. This infiltration process was repeated several times to produce bars that had been subjected to multiple infiltrations, then the bars were calcined in a N 2 atmosphere at 1480°C to obtain mullite/SiAlON/alumina composites. The infiltration process increased the percentage of nitrogenous crystalline and mullite phases in the matrix; therefore, a decrease of the composite microporosity was observed. The infiltration increased the mechanical strength of the composites. Of the two composites, the one produced using prehydrolyzed ethyl polysilicate as the infiltrant had a higher mechanical strength, before and after being subjected to a severe thermal shock.Keywords
This publication has 7 references indexed in Scilit:
- Carbonitriding of Clay: Relation between the Weight Loss and Crystalline Phases during ReactionJournal of the American Ceramic Society, 1993
- Formation of β'-sialon in the Al-SiO2-N2 systemThermochimica Acta, 1992
- Epitactic Nucleation of Spinel in Aluminosilicate Gels and Its Effect on Mullite CrystallizationJournal of the American Ceramic Society, 1991
- Mullite/Alumina Particulate Composites by Infiltration ProcessingJournal of the American Ceramic Society, 1989
- Dense single-phase β-sialon ceramics by glass-encapsulated hot isostatic pressingJournal of Materials Science, 1989
- Incorporation of Mullite as a Second Phase into Alumina by an Infiltration TechniqueJournal of the American Ceramic Society, 1988
- Sintering and Microstructure of Mullite AerogelsJournal of the American Ceramic Society, 1988