Effects of Strain Rate and Amplitude Variations on Solder Joint Fatigue Life in Isothermal Cycling
Authors:
- 23 March 2016
- journal article
- Published by ASME International in Journal of Electronic Packaging
- Vol. 138 (2) , 021002
Abstract
The behavior of lead-free solder alloys under realistic service conditions is still not well understood. Life prediction of solder joints relies on conducting accelerated tests and extrapolating results to service conditions. This can be very misleading without proper constitutive relations and without understanding the effects of cycling parameter variations common under realistic service conditions. It has been shown that the fatigue life depends on the inelastic work accumulation, independently of cycling-induced material property variations, which explains the breakdown of damage accumulation rules and allows the development of a modified Miner's rule. This paper discusses the interacting effects of strain rate and amplitude variations on solder joint fatigue life. Individual SnAgCu solder joints with two different Ag contents (SAC305 and SAC105) were tested in low cycling shear fatigue under single and varying amplitudes with different strain rates. Such a shear fatigue experiment allows the measurement of work accumulation and the evolution of solder deformation properties during cycling. The results showed that cycling with a lower strain rate at fixed amplitude causes more damage per cycle. Alternating between mild amplitude at a high strain rate and harsh amplitude at a low strain rate leads to ongoing increases in the rate of damage at the mild amplitude and thus relatively rapid failure. In comparing SAC305 with SAC105, the effect of strain rate on both alloys is almost the same, and SAC305 is still more fatigue resistant than SAC105 in varying amplitude cycling with any strain rate.Keywords
This publication has 25 references indexed in Scilit:
- Statistical Variations of Solder Joint Fatigue Life Under Realistic Service ConditionsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2015
- Damage Evolution in Lead Free Solder Joints in Isothermal FatigueJournal of Electronic Packaging, 2015
- Challenges for the prediction of solder joint life in long term vibration2015
- Assessment of Solder Joint Fatigue Life Under Realistic Service ConditionsJournal of Electronic Materials, 2014
- Solder joint reliability under realistic service conditionsMicroelectronics Reliability, 2013
- Forming Limits of a Sheet Metal After Continuous-Bending-Under-Tension LoadingJournal of Engineering Materials and Technology, 2013
- Recrystallization and Precipitate Coarsening in Pb-Free Solder Joints During Thermomechanical FatigueJournal of Electronic Materials, 2011
- A microscopic stored energy approach to generalize fatigue life stress ratiosInternational Journal of Fatigue, 2010
- Fatigue crack-growth behavior of Sn-Ag-Cu and Sn-Ag-Cu-Bi lead-free soldersJournal of Electronic Materials, 2002
- Effect of strain rate on the dislocation cell size at various stress levels during uniaxial tensile testing of electrical conductor aluminumMaterials Science and Engineering: A, 1991