Characteristics of Waste Iron Powder as a Fine Filler in a High-Calcium Fly Ash Geopolymer
Open Access
Abstract
Geopolymer (GP) has been applied as an environmentally-friendly construction material in recent years. Many pozzolanic wastes, such as fly ash (FA) and bottom ash, are commonly used as source materials for synthesizing geopolymer. Nonetheless, many non-pozzolanic wastes are often applied in the field of civil engineering, including waste iron powder (WIP). WIPs are massively produced as by-products from iron and steel industries, and the production rate increases every year. As an iron-based material, WIP has properties of heat induction and restoration, which can enhance the heat curing process of GP. Therefore, this study aimed to utilize WIP in high-calcium FA geopolymer to develop a new type of geopolymer and examine its properties compared to the conventional geopolymer. Scanning electron microscopy and X-ray diffraction were performed on the geopolymers. Mechanical properties, including compressive strength and flexural strength, were also determined. In addition, setting time and temperature monitoring during the heat curing process were carried out. The results indicated that the addition of WIP in FA geopolymer decreased the compressive strength, owing to the formation of tetrahydroxoferrate (II) sodium or Na2[Fe(OH)4]. However, a significant increase in the flexural strength of GP with WIP addition was detected. A flexural strength of 8.5 MPa was achieved by a 28-day sample with 20% of WIP addition, nearly three times higher than that of control.Keywords
This publication has 30 references indexed in Scilit:
- Characterizations of FBC/PCC fly ash geopolymeric compositesConstruction and Building Materials, 2014
- The role of iron in the formation of inorganic polymers (geopolymers) from volcanic ash: a 57Fe Mössbauer spectroscopy studyJournal of Materials Science, 2013
- Thermal treatment and utilization of Al-rich waste in high calcium fly ash geopolymeric materialsInternational Journal of Minerals, Metallurgy and Materials, 2012
- Crack shape and rust distribution in corrosion-induced cracking concreteCorrosion Science, 2012
- Experimental investigation of the fatigue behaviour of asphalt concrete mixtures containing waste iron powderMaterials Science and Engineering: A, 2011
- The Effect of Curing Temperature on Physical and Chemical Properties of GeopolymersPhysics Procedia, 2011
- Influence of NaOH solution on the synthesis of fly ash geopolymerMinerals Engineering, 2009
- Comparative study on the characteristics of fly ash and bottom ash geopolymersWaste Management, 2009
- Workability and strength of coarse high calcium fly ash geopolymerCement and Concrete Composites, 2007
- Alkali-activated fly ashesCement and Concrete Research, 1999