Nano-mechanical properties of TaNbHfZr metallic glass films
- 30 December 2018
- journal article
- research article
- Published by SAGE Publications in Surface Engineering
- Vol. 35 (8) , 728-735
Abstract
TaNbHfZr metallic glass films with thicknesses from 50 to 1000 nm were deposited on Si (100) wafers by magnetron sputtering. The surface topography and microstructure were confirmed by AFM, XRD and TEM. Nanoindentation was carried out to explore the effects of film thickness on the hardness and the deformation mechanisms. TaNbHfZr films thicker than 50 nm can effectively decrease the stress level on the Si substrate and suppress the indentation-introduced phase transition. Pile-ups took place for the thinner films (50 and 100 nm) due to the inactive thickness-dependent diffusion process, while sink-in for thicker films occur because of the high diffusion coefficient. Correction of H considering pile-ups and substrate effects was conducted to obtain the intrinsic surface hardness of ∼8 GPa. However, the corrected H for thin films with pile-up morphology are much lower as the localised plastic flow was strongly affected by the harder Si substrates and the retarded diffusion abilities of atoms.Keywords
Funding Information
- National Natural Science Foundation of China (11472080)
- Key Science and Technology Program of Shaanxi Province (2015GY143)
- State Key Laboratory for Mechanical Behavior of Materials (20141603)
- National Natural Science Foundation of China (11472080)
- Key Science and Technology Program of Shaanxi Province (2015GY143)
- State Key Laboratory for Mechanical Behavior of Materials (20141603)
This publication has 30 references indexed in Scilit:
- Entropies in Alloy Design for High-Entropy and Bulk Glassy AlloysEntropy, 2013
- Shear band evolution and hardness change in cold-rolled bulk metallic glassesActa Materialia, 2010
- Tensile ductility and necking of metallic glassNature Materials, 2007
- Softening Caused by Profuse Shear Banding in a Bulk Metallic GlassPhysical Review Letters, 2006
- Grain size-dependent diffusion activation energy in nanomaterialsSolid State Communications, 2004
- Microforming of three-dimensional microstructures from thin-film metallic glassJournal of Microelectromechanical Systems, 2003
- Bulk Glass Formation of Ti-Zr-Hf-Cu-M (M=Fe, Co, Ni) AlloysMATERIALS TRANSACTIONS, 2002
- Study of mechanical deformation in bulk metallic glass through instrumented indentationActa Materialia, 2001
- Stabilization of metallic supercooled liquid and bulk amorphous alloysActa Materialia, 2000
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992