Resin transfer molding (RTM) with toughened cyanate ester resin systems
Authors:
- 15 April 1998
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 19 (2) , 166-179
Abstract
This investigation explored the feasibility of recently developed toughened cyanate ester networks as candidate materials for high performance composite matrix applications. The resin investigated was a bisphenol‐A cyanate ester toughened with hydroxy functionalized phenolphthalein based amorphous poly(arylene ether sulfone). A series of four toughened cyanate ester resins were generated by varying the concentration and the molecular weight of the toughener. The thermoplastic modified toughened networks exhibited improvement in the fracture toughness over the base cyanate ester networks without significant reductions in mechanical properties or glass transition temperature. Carbon fabric composite panels were manufactured by liquid molding processes (resin transfer molding and resin film infusion) with the untoughened and toughened cyanate ester resin systems. The panels were subjected to physical, impact damage, and fracture toughness tests. The results of physical testing indicate consistently uniform quality, and the maximum void content was found to be less than 2%. The toughened cyanate ester composites exhibited significantly improved impact damage resistance and tolerance compared with hot‐melt epoxy systems. A marked increase in the mode II composite fracture toughness was observed with an increase in the concentration and the molecular weight of the toughener.Keywords
This publication has 11 references indexed in Scilit:
- Production of controlled networks and morphologies in toughened thermosetting resins using real-time, in situ cure monitoringPolymer, 1996
- Adhesive and Mechanical Properties of Reactive Polysulfone Modified Epoxy ResinsThe Journal of Adhesion, 1994
- Rubber-Modified Epoxies1993
- Effect of thermoplastic modifier variables on toughening a bismaleimide matrix resin for high-performance composite materialsPolymer, 1993
- Rubber-Modified epoxies. IV. Influence of morphology on mechanical propertiesJournal of Applied Polymer Science, 1991
- Impact response of tough carbon fibre compositesComposite Structures, 1989
- Testing of new‐generation carbon fiber/toughened resin epoxy systemsPolymer Composites, 1988
- An assessment of the impact performance of CFRP reinforced with high-strain carbon fibresComposites Science and Technology, 1986
- Moisture and Temperature Effects on the Mixed-Mode Delamination Fracture of Unidirectional Graphite/Epoxy1985
- Stiffness and strength behaviour of woven fabric compositesJournal of Materials Science, 1982