Improvement to secondary cooling scheme for beam blank continuous casting
Authors:
- 1 February 2012
- journal article
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
- Vol. 39 (2) , 125-132
Abstract
A three-dimensional transient heat transfer model has been developed to simulate the solidification process of strand in a continuous casting. The temperature distribution of a typical beam blank from the meniscus to the unbending point was investigated by the numerical simulation method, which is justified by the in situ test data. Based on the temperature distribution of the beam blank, improvement on the layout of spray nozzles and water consumption in the secondary cooling zone is proposed. When the improved cooling scheme was employed, the temperature of the beam blank in the secondary cooling zone was controlled in a suitable range determined by the metallurgical criteria, and the transverse surface temperature on a cross-section of the strand became more uniform, which was assessed by the standard deviation of temperature. Moreover, the macrostructure defects are greatly decreased and the quality of the beam blank product is enhanced.Keywords
This publication has 11 references indexed in Scilit:
- Numerical simulation of the thermo-mechanical process for beam blank continuous castingActa Metallurgica Sinica (English Letters), 2007
- Fluid Flow and Solidification Simulation in Beam Blank Continuous Casting Process With 3D Coupled ModelJournal of Iron and Steel Research International, 2006
- 3D steady state and transient simulation tools for heat transfer and solidification in continuous castingMaterials Science and Engineering: A, 2005
- Mathematical modeling and optimization strategies (genetic algorithm and knowledge base) applied to the continuous casting of steelEngineering Applications of Artificial Intelligence, 2003
- A transient simulation and dynamic spray cooling control model for continuous steel castingMetallurgical and Materials Transactions B, 2003
- The use of artificial intelligence technique for the optimisation of process parameters used in the continuous casting of steelApplied Mathematical Modelling, 2002
- Phase diagram for the system CaO-Al2O3-ZrO2Metallurgical and Materials Transactions B, 2000
- 3-dimensional Mathematical Model for the Analysis of Continuous Beam Blank Casting Using Body Fitted Coordinate System.ISIJ International, 1998
- Simulation of the continuous casting process by a mathematical modelInternational Journal of Mechanical Sciences, 1997
- Real-time simulation of heat transfer in continuous castingMetallurgical Transactions B, 1993