Suppression of Nonsynchronous Vibration Through Intentional Aerodynamic and Structural Mistuning
- 27 September 2021
- journal article
- research article
- Published by Wiley in Journal of Turbomachinery
- Vol. 144 (2)
Abstract
Nonsynchronous vibrations (NSVs) arising near the stall boundary of compressors are a recurring and potentially safety-critical problem in modern axial compressors and fans. Recent research has improved predictive capabilities and physical understanding of NSV, but prevention measures are still lacking. This article addresses this by systematically studying the influence of aerodynamic and structural mistuning on NSV. This is achieved by incorporating mistuning effects in a validated linear model, in which individual blade modes are modeled as single-degree-of-freedom mass oscillators coupled by a convected aerodynamic disturbance term. The results demonstrate that both structural and aerodynamic mistuning are effective. While structural mistuning improves stability by preventing aero-structure lock-in, aerodynamic mistuning, which locally reduces the tip blockage and attenuates the aerodynamic disturbance causing NSV. In the latter case, the circumferentially averaged conditions are shown to be most influential, while the pattern plays a minor role. A combination of moderate aerodynamic and structural mistuning (1%) was also found to be effective. These findings are relevant for design decisions, demonstrating that small blade-to-blade variations can suppress NSV.Keywords
Funding Information
- Cleansky (864719)
- Engineering and Physical Sciences Research Council (EP/R004951/1)
This publication has 20 references indexed in Scilit:
- Rotating Stall Observations in a High Speed Compressor—Part I: Experimental StudyJournal of Turbomachinery, 2015
- Origins and Structure of Spike-Type Rotating StallJournal of Turbomachinery, 2015
- Investigation of Flow Instability Mechanism Causing Compressor Rotor-Blade Nonsynchronous VibrationAIAA Journal, 2014
- Forced Response Analysis of a Mistuned Compressor BliskJournal of Engineering for Gas Turbines and Power, 2014
- Stall Warning by Blade Pressure Signature AnalysisJournal of Turbomachinery, 2012
- The Tip Clearance Flow Resonance Behind Axial Compressor Nonsynchronous VibrationJournal of Turbomachinery, 2011
- Role of Tip Clearance Flow in Rotating Instabilities and Nonsynchronous VibrationsJournal of Propulsion and Power, 2010
- Criteria for Spike Initiated Rotating StallJournal of Turbomachinery, 2008
- ROTATING BLADE FLOW INSTABILITY AS A SOURCE OF NOISE IN AXIAL TURBOMACHINESJournal of Sound and Vibration, 1997
- Flutter and Response of a Mistuned Cascade in Incompressible FlowAIAA Journal, 1982