Transformation of waste carbon fiber prepreg into sustainable composites: Application in the automotive industry components
Open Access
- 8 April 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (10) , 9471-9486
Abstract
Carbon fiber (CF) prepregs are employed in the manufacture of many different aeronautical structural and non‐structural components. Following the cure of the prepregs in molds, trimming is generally used to give the final shape to the components. Considering the aircraft's vast surface area and the use of multiple prepreg layers in each component, an extensive amount of carbon fiber prepreg is discarded. The unique characteristics of carbon fibers render this CF waste highly valuable and requires its efficient recycling. Cured waste CF prepregs were milled and processed in this research to produce chopped carbon fibers for use in the novel composite development. The matrix material used in the composites was selected as recycled polypropylene sourced from old surgical masks, which highlighted the sustainability of the developed composites. To enhance the quality of the fiber‐matrix interface and improve the impact resistance of the composites an anhydride‐grafted polyethylene (Fusabond) was employed in small quantities. From mechanical characterizations, synergistic effects of the fillers were observed. Besides, compositions containing CF and Fusabond are found more impact resistant than neat matrix. In addition, the use of carbon fibers increased fracture toughness of the matrix through various mechanisms including fiber bridging, fiber pullout, and matrix plastic deformation identified by scanning electron microscopy fractography. Thermomechanical characterizations using dynamic mechanical analysis revealed that carbon fiber raises the neat matrix's glass transition temperature. The developed materials are intended to be employed in the automotive industry to produce inner fender liners, with an optimal composition determined by an optimization research.Highlights: Carbon fiber (CF) derived from aerospace fresh scraps significantly improved the mechanical properties of the polymer matrix. Anhydride‐grafted polyethylene incorporation remarkably enhanced the impact resistance of the polymer. CF demonstrated a bridge effect and improved the fracture toughness of the composites. The use of recycled CF presents encouraging prospects in the automotive industry for the production of inner fender liners.Keywords
Funding Information
- Bilimsel Araştırma Projeleri Birimi, İstanbul Teknik Üniversitesi (MAB‐ 2021‐42811)
This publication has 65 references indexed in Scilit:
- Development of a method for recycling factory waste carbon fiber prepregs and increasing the added value of the collected materialPolymer Composites, 2023
- Reuse of carbon fiber waste to produce composites with polypropylene. The effect of styrene‐(ethylene‐butylene)‐styrene grafted with maleic anhydride and ethylene‐propylene‐diene grafted with maleic anhydride copolymersPolymer Composites, 2021
- Effect of non‐woven flax mat manufacturing parameters and consolidation pressure on properties of composites manufactured using vacuum‐assisted resin transfer moldingPolymer Composites, 2021
- Prepreg tack: A review of mechanisms, measurement, and manufacturing implicationPolymer Composites, 2020
- Manufacturing of recycled carbon fiber reinforced polypropylene composites by high speed thermo‐kinetic mixing for lightweight applicationsPolymer Composites, 2017
- Synergistic Effect of Functionalized Carbon Nanotubes and Micron‐Sized Rubber Particles on the Mechanical Properties of Epoxy ResinMacromolecular Materials and Engineering, 2016
- Review of the applications of biocomposites in the automotive industryPolymer Composites, 2016
- Recycling carbon fiber from composite waste and its reinforcing effect on polyvinylidene fluoride composite: Mechanical, morphology, and interface propertiesPolymer Composites, 2015
- Up‐cycling end‐of‐use materials: Highly filled thermoplastic composites obtained by loading waste carbon fiber composite into fluidified recycled polystyrenePolymer Composites, 2013
- Surface characterisation of carbon fibre recycled using fluidised bedApplied Surface Science, 2008