Study on the Temperature Distribution and Natural Frequency of a Circular Saw Blade during Three Types of Wood Sawing Processes
Authors:
Open Access
- 1 June 2024
- journal article
- research article
- Published by Forest Products Society in Forest Products Journal
- Vol. 74 (3) , 213-219
Abstract
The stability of a circular saw blade during the cutting process affects the knife life and the material utilization rate. In this article, continuous sawing experiments were carried out on medium-density fiberboard, Pterocarpus soyauxii board, and reconstituted bamboo lumber board. The temperature distribution of the saw blade surface was measured. The natural frequency of the saw blade under thermal stress was analyzed by the finite element method. The results show that the material density is positively correlated with the edge temperature of the saw blade. Greater temperature differences within the saw blade lead to worsening dynamic stability. When cutting the reconstituted bamboo lumber board, the saw blade will suddenly lose stability, and the surface temperature will rise rapidly, which greatly shortens the life of the saw blade.Keywords
This publication has 9 references indexed in Scilit:
- Reducing the Energy Consumption of Circular Saws in the Cutting Process of PlywoodCoatings, 2022
- Influence of temperature distribution on circular saw blade natural frequencies during cuttingBioResources, 2020
- Methodology of Temperature Monitoring in the Process of CNC Machining of Solid WoodSustainability, 2018
- Miniature Uncooled and Unchopped Fiber Optic Infrared Thermometer for Application to Cutting Tool Temperature MeasurementSensors, 2018
- Development of a monitoring system for guided circular saws: an experimental investigationWood Material Science & Engineering, 2017
- The Influence of Radial Slots on Dynamic Stability of Thermally Stressed Circular Saw BladeDrvna industrija, 2017
- Analysis of Dynamic Characteristics of Rotating Circular Saw Subjected to Thermal Loading and TensioningJournal of Thermal Stresses, 2010
- Influence of CrN coating in wood machining from heat flux estimation in the toolInternational Journal of Thermal Sciences, 2005
- Performance of coated carbide tools in turning wood-based materials: Effect of cutting speeds and coating materials on the wear characteristics of coated carbide tools in turning wood-chip cement boardJournal of Wood Science, 2001