Finite Element Analysis of the Magneto-Mechanical Coupling Due to Punching Process in Electrical Steel Sheet
- 9 February 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 57 (6) , 1-4
Abstract
In this paper, a finite element (FE) modeling of the punching effect on the magnetic properties of electrical steel sheet is carried out. For that, the modified anhysteretic Sablik model is applied together with the plastic strain distribution obtained from a punching process simulation performed using the software ABAQUS. First, a synchronous electrical machine is simulated including the effect of the punching process, it shows the degradation of the magnetic flux density at the lamination edges and an increase of the iron losses. Then, results obtained from the magneto-mechanical simulation are investigated in terms of the method used to implement the plastic strain distribution in the FE computation. Two examples have been investigated: a square steel sheet and a tooth of an electrical machine.Keywords
This publication has 10 references indexed in Scilit:
- Finite-Element Modeling of Magnetic Properties Degradation Due to Plastic DeformationIEEE Transactions on Magnetics, 2020
- Effect of Laser Cutting on Core Losses in Electrical Machines—Measurements and ModelingIEEE Transactions on Industrial Electronics, 2019
- Influence of Grain Size and Blanking Clearance on Magnetic Properties Deterioration of Non-Oriented Electrical SteelIEEE Transactions on Magnetics, 2018
- Influence of shear cutting parameters on the electromagnetic properties of non-oriented electrical steel sheetsJournal of Magnetism and Magnetic Materials, 2017
- Effect of elastic and plastic tensile mechanical loading on the magnetic properties of NGO electrical steelJournal of Magnetism and Magnetic Materials, 2016
- Modeling the Effect of Cutting on the Magnetic Properties of Electrical Steel SheetsIEEE Transactions on Industrial Electronics, 2016
- Rate-dependent constitutive model for sheet metal blanking investigationMaterials Science and Engineering: A, 2008
- Discrete finite element characterizations of source fields for volume and boundary constraints in electromagnetic problemsJournal of Computational and Applied Mathematics, 2007
- Modeling Plastic Deformation Effects in Steel on Hysteresis Loops With the Same Maximum Flux DensityIEEE Transactions on Magnetics, 2004
- Theory of ferromagnetic hysteresisJournal of Magnetism and Magnetic Materials, 1986