Adaptive Fault-Tolerant Tracking Control for Multi-Joint Robot Manipulators via Neural Network-Based Synchronization
Open Access
Abstract
In this paper, adaptive fault-tolerant control for multi-joint robot manipulators is proposed through the combination of synchronous techniques and neural networks. By using a synchronization technique, the position error at each joint simultaneously approaches zero during convergence due to the constraints imposed by the synchronization controller. This aspect is particularly important in fault-tolerant control, as it enables the robot to rapidly and effectively reduce the impact of faults, ensuring the performance of the robot when faults occur. Additionally, the neural network technique is used to compensate for uncertainty, disturbances, and faults in the system via online updating. Firstly, novel robust synchronous control for a robot manipulator based on terminal sliding mode control is presented. Subsequently, a combination of the novel synchronous control and neural network is proposed to enhance the fault tolerance of the robot manipulator. Finally, simulation results for a 3-DOF robot manipulator are presented to demonstrate the effectiveness of the proposed controller in comparison to traditional control techniques.Keywords
Funding Information
- UK Net Zero Technology Centre (1716541)
This publication has 50 references indexed in Scilit:
- Adaptive fault-tolerant control for uncertain nonlinear systems with both parameter estimator and controller triggeringAutomatica, 2023
- Adaptive neural network state constrained fault-tolerant control for a class of pure-feedback systems with actuator faultsNeurocomputing, 2022
- Parallel orthogonal deep neural networkNeural Networks, 2021
- Adaptive fuzzy finite-time fault-tolerant control for switched nonlinear large-scale systems with actuator and sensor faultsJournal of the Franklin Institute, 2020
- Non-kinematic calibration of industrial robots using a rigid–flexible coupling error model and a full pose measurement methodRobotics and Computer-Integrated Manufacturing, 2019
- Gradient Descent Methods for Type-2 Fuzzy Neural Networks2016
- Neural network-based robust finite-time control for robotic manipulators considering actuator dynamicsRobotics and Computer-Integrated Manufacturing, 2013
- Mutual Synchronization of Multiple Robot Manipulators with Unknown DynamicsJournal of Intelligent & Robotic Systems, 2012
- Fault Tolerant Control Using Sliding Modes with On-Line Control Allocation2010
- Robotic fault detection and fault tolerance: A surveyReliability Engineering & System Safety, 1994