Quenched and tempered high strength steel: A review
Authors:
Open Access
- 22 December 2020
- journal article
- review article
- Published by Metallurgy and Materials Science Research Institute, Chulalongkorn University in Journal of Metals, Materials and Minerals
- Vol. 30 (4) , 19-29
Abstract
Quenched and tempered steel are broadly classified as low alloy conventional grades with C content of 0.15-0.40% and tool steels with C content as high as 2% alloyed with strong carbide forming elements such as Cr, V, Mo etc. in the range of 1-12%. In both the cases, steels are used in hardened/quenched and tempered or auto tempered condition for improved toughness, strength and wear resistance. The C content and tempering temperature are optimized based on desired application. However, achieving high strength/hardness along with adequate toughness is a challenge. The chemistry design is one of the important parts of developing these grades. The judicious amount of hardenability elements like Mn, Cr, Mo, B etc. are added for achieving required as quenched hardness while excess addition of these elements will not be cost effective. Optimized austenite grain size before quenching is also key to achieve hardenability as well as toughness. All these points have been reviewed systematically in this paper for the first time as there is no such review available covering all aspect of quenched and tempered grade. Unlike text books or any past review articles, this is a systematic review of quenched and tempered steel which will help in designing suitable chemistry and process parameters for producing different grades of quenched and tempered steel in industrial scale.Keywords
This publication has 33 references indexed in Scilit:
- The effect of tempering temperature on the mechanical properties and fracture morphology of a NiCrMoV steelMaterials Characterization, 2008
- Computer Simulation of the Precipitate Evolution during Industrial Heat Treatment of Complex AlloysMaterials Science Forum, 2007
- Effect of Austenite Grain Size on the Morphology and Crystallography of Lath Martensite in Low Carbon SteelsISIJ International, 2005
- Effect of hardness on three very different forms of wearWear, 1997
- Estimation of the effect of stress/phase transformation interaction when calculating internal stress during martensitic quenching of steel.Transactions of the Iron and Steel Institute of Japan, 1982
- Hardness of tempered martensite in carbon and low-alloy steelsMetallurgical Transactions A, 1977
- The Rockwell C hardness of quenched high-purity iron-carbon alloys containing 0.09 to 1.91% carbonJournal of Materials Science, 1976
- On high fracture toughness of coarse-grained AISI 4130 steelMaterials Science and Engineering, 1975
- Tempering of steelMetallurgical Transactions, 1972
- Structural changes and strengthening in the strain tempering of martensiteMaterials Science and Engineering, 1970